u-boot.git/drivers/misc/Kconfig, branch v2022.04 Unnamed repository; edit this file 'description' to name the repository. misc: add sl28cpld base driver 2022-02-28T06:29:35+00:00 Michael Walle michael@walle.cc 2022-02-25T12:36:24+00:00 42595eb7067c6c076e1c98213438be727f883fe2 Add a multi-function device driver which will probe its children and provides methods to access the device. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> 
Add a multi-function device driver which will probe its children and
provides methods to access the device.

Signed-off-by: Michael Walle <michael@walle.cc>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
drivers: misc: Makefile: Enable fs_loader compilation at SPL Level 2022-02-08T16:00:02+00:00 Keerthy j-keerthy@ti.com 2022-01-27T12:16:53+00:00 b071a07743d44e58046ee5f52df9b6fab7733654 Enable fs_loader compilation at SPL Level. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix compilation failures for J721e platform] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> 
Enable fs_loader compilation at SPL Level.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[Amjad: fix compilation failures for J721e platform]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Convert CONFIG_FSL_IFC to Kconfig 2021-12-27T13:40:33+00:00 Tom Rini trini@konsulko.com 2021-12-11T19:55:49+00:00 98ab831da74e5e845189a35f3d82628c6d175a82 This converts the following to Kconfig: CONFIG_FSL_IFC This is done via select statements to match previous logic. Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_FSL_IFC

This is done via select statements to match previous logic.

Signed-off-by: Tom Rini <trini@konsulko.com>
Clarify CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW in Kconfig 2021-12-27T13:40:33+00:00 Tom Rini trini@konsulko.com 2021-12-11T19:55:47+00:00 5fd4a7ed0ce102c7f3720f67555878bc0b395eb6 This is a "hex" prompt but the default value was given as an int. Switch the default to hex (0x0) and remove the defconfigs that were using the default, but as hex before. Signed-off-by: Tom Rini <trini@konsulko.com> 
This is a "hex" prompt but the default value was given as an int.
Switch the default to hex (0x0) and remove the defconfigs that were
using the default, but as hex before.

Signed-off-by: Tom Rini <trini@konsulko.com>
misc: ocotp: Allow disabling ocotp driver in SPL 2021-10-07T14:53:50+00:00 Michael Scott mike@foundries.io 2021-09-25T16:49:28+00:00 33e9a6956058663c6b92ed39b0464d1693cc963a This allows removal of the OCOTP driver when SPL is enabled. Disabling OCOTP reduces SPL size efficiently. Signed-off-by: Michael Scott <mike@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com> 
This allows removal of the OCOTP driver when SPL is enabled.
Disabling OCOTP reduces SPL size efficiently.

Signed-off-by: Michael Scott <mike@foundries.io>
Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig 2021-08-30T18:10:06+00:00 Tom Rini trini@konsulko.com 2021-08-17T21:59:45+00:00 88cd7d0ea961ca11b1eeaaea8b7811573b103abb - Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com> 
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR
  based on current usage.
- Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
  CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE
  CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  to Kconfig.  We move these symbols around a bit and add appropriate
  dependencies to them.  In some cases, we now add a correct default value
  as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
misc: make CONFIG_IRQ selectable for all platforms 2021-04-20T11:31:12+00:00 Wasim Khan wasim.khan@nxp.com 2021-03-08T15:48:13+00:00 182c5f1efbec12419ef458db5565101647ff5911 UCLASS_IRQ driver is not Intel specific. Make CONFIG_IRQ selectable for all platforms. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
UCLASS_IRQ driver is not Intel specific. Make CONFIG_IRQ
selectable for all platforms.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
qemu: add MMIO driver for QFW 2021-04-12T21:45:40+00:00 Asherah Connor ashe@kivikakk.ee 2021-03-19T07:21:42+00:00 5830b57bf9aeed1b072a54faa7d74f6d62cac4c6 Add MMIO driver for QFW. Note that there is no consumer as of this patch. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add MMIO driver for QFW.

Note that there is no consumer as of this patch.

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
x86: qemu: move QFW to its own uclass 2021-04-12T21:44:55+00:00 Asherah Connor ashe@kivikakk.ee 2021-03-19T07:21:40+00:00 5b0b43e0e25dbeed62a2155e7f3be562b9ceb9bd We move qfw into its own uclass and split the PIO functions into a specific driver for that uclass. The PIO driver is selected in the qemu-x86 board config (this covers x86 and x86_64). include/qfw.h is cleaned up and documentation added. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> 
We move qfw into its own uclass and split the PIO functions into a
specific driver for that uclass.  The PIO driver is selected in the
qemu-x86 board config (this covers x86 and x86_64).

include/qfw.h is cleaned up and documentation added.

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
test: Move some test drivers into their own file 2021-01-05T19:24:40+00:00 Simon Glass sjg@chromium.org 2020-12-23T15:11:18+00:00 079ac59586fa1e0c69020e74e4f16cbfdf82232d At present several test drivers are part of the test file itself. Some of these are useful for of-platdata tests. Separate them out so we can use them for other things also. A few adjustments are needed so this driver can build for sandbox_spl as well. Signed-off-by: Simon Glass <sjg@chromium.org> 
At present several test drivers are part of the test file itself. Some of
these are useful for of-platdata tests. Separate them out so we can use
them for other things also.

A few adjustments are needed so this driver can build for sandbox_spl as
well.

Signed-off-by: Simon Glass <sjg@chromium.org>