u-boot.git/drivers/misc/Makefile, branch v2018.03

drivers/misc: Share qbman init between archs

2018-01-10T20:28:47+00:00

This patch adds changes necessary to move functionality present in
PowerPC folders with ARM architectures that have DPAA1 QBMan hardware

- Create new board/freescale/common/fsl_portals.c to house shared
  device tree fixups for DPAA1 devices with ARM and PowerPC cores
- Add new header file to top includes directory to allow files in
  both architectures to grab the function prototypes
- Port inhibit_portals() from PowerPC to ARM. This function is used in
  setup to disable interrupts on all QMan and BMan portals. It is
  needed because the interrupts are enabled by default for all portals
  including unused/uninitialised portals. When the kernel attempts to
  go to deep sleep the unused portals prevent it from doing so

Signed-off-by: Ahmed Mansour 
Reviewed-by: York Sun

dm: misc: add stm32 rcc driver

2017-09-22T11:40:02+00:00

This patch adds the support of reset and clock control
block (rcc) found on STM32 SoCs.
This driver is similar to a MFD linux driver.

This driver supports currently STM32H7 only.
STM32F4 and STM32F7 will be migrated to this rcc MFD driver
in the future to uniformize all STM32 SoCs already upstreamed.

Signed-off-by: Christophe Kerello 
Signed-off-by: Patrice Chotard 
Reviewed-by: Vikas Manocha 
Reviewed-by: Simon Glass

misc: Kconfig: Add SPL_I2C_EEPROM option

2017-09-12T02:44:30+00:00

This option is an SPL-variant of the I2C_EEPROM option to enable
the driver for generic I2C-attached EEPROMs for SPL.

Signed-off-by: Wenyou Yang 
Reviewed-by: Simon Glass

drivers/misc: Add basic support for ATSHA204A Crypto module

2017-07-12T04:57:38+00:00

This module can be found on the Turris Omnia board connected
via the I2C interface.

Among some cryptographic functions, the chip has a 512 bit
One Time Programmable memory, 88 byte configuration memory
and 512 byte general purpose memory.

The Turris Omnia stores serial number and device MAC address in
the OTP memory.

This commit adds basic support for reading the EEPROM and also
exposes the chips Random Number Generator.

The driver is based on code by
  Josh Datko, Cryptotronix, jbd@cryptotronix.com
and also
  Tomas Hlavacek, CZ.NIC, tomas.hlavacek@nic.cz

Signed-off-by: Tomas Hlavacek 
Signed-off-by: Marek Behun 

 create mode 100644 drivers/misc/atsha204a-i2c.c
 create mode 100644 include/atsha204a-i2c.h
Signed-off-by: Stefan Roese

rockchip: efuse: add (misc) driver for RK3399 non-secure efuse block

2017-06-07T13:29:17+00:00

This adds a simple driver for reading the efuse block of the RK3399.
It should be easy enough to add drivers for other devices (e.g. the
RK3328, RK3368, etc.) by passing the device details via driver_data.

Unlike the kernel driver (using the nvmem subsystem), we don't expose
the efuse as multiple named cells, but rather as a linear memory that
can be read using misc_read(...).

The primary use case (as of today) is the generation of a 'serial#'
(and a 'cpuid#') environment variable for the RK3399-Q7 (Puma)
system-on-module.

Note that this adds a debug-only (i.e. only if DEBUG is defined)
command 'rk3399_dump_efuses' that dumps the efuse block's content.
N.B.: The name 'rk3399_dump_efuses' was intentionally chosen to
      include a SoC-name (together with a comment in the function) to
      remind whoever adds support for additional SoCs that this
      function currently makes assumptions regarding the size of the
      fuse-box based on the RK3399. The hope is that the function is
      adjusted to reflect any changes resulting from generalising the
      driver for multiple SoCs and is then renamed.

Signed-off-by: Philipp Tomsich 

Reviewed-by: Simon Glass

Drop the pdsp188x driver

2017-04-30T17:41:02+00:00

This is not used in U-Boot.

Signed-off-by: Simon Glass

status_led: Kconfig migration

2017-01-21T20:12:33+00:00

Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.

TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.

Tested boards: CL-SOM-AM57x, CM-T335

Signed-off-by: Uri Mashiach

misc: implement Tegra CAR core driver

2016-09-27T16:11:02+00:00

The Tegra CAR (Clock And Reset) module provides control of most clocks
and reset signals within the Tegra SoC. This change implements a driver
for this module. However, since the module implements multiple kinds of
services (clocks, resets, perhaps more), all this driver does is bind
various sub-devices, which in turn provide the real services. This driver
is essentially an "MFD" (Multi-Function Device) in Linux kernel speak.

Signed-off-by: Stephen Warren 
Signed-off-by: Tom Warren

armv8: ls2080a: Remove debug server support

2016-09-14T21:07:19+00:00

Debug server feature has been dropped from roadmap.

Signed-off-by: York Sun

misc: Add simple driver for some Nuvoton NCT6102D devices

2016-08-16T03:44:09+00:00

This simple driver provides some functions to control some of the
integrated devices. The watchdog is enabled per default. This driver
adds a function to disable the watchdog. Also the internal legacy
UART (io address 0x3f8/0x2f8) is enabled per default.

Signed-off-by: Stefan Roese 
Reviewed-by: Bin Meng 
Cc: Simon Glass