u-boot.git/drivers/misc/Makefile, branch v2024.04 Unnamed repository; edit this file 'description' to name the repository. smbios: copy QEMU tables 2024-01-16T22:05:29+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2023-12-23T01:03:34+00:00 1c5aab803c0b0f07be1d3b0029f4031463497acf QEMU provides SMBIOS tables with detailed information. We should not try to replicate them in U-Boot. If we want to inform about U-Boot, we can add a Firmware Inventory Information (type 45) table in future. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
QEMU provides SMBIOS tables with detailed information. We should not try to
replicate them in U-Boot.

If we want to inform about U-Boot, we can add a Firmware Inventory
Information (type 45) table in future.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
serial: msm-geni: don't rely on parent misc device 2024-01-16T12:26:52+00:00 Caleb Connolly caleb.connolly@linaro.org 2023-11-14T12:51:11+00:00 836b7f447429960fa6ff8b6d25c11e39b8c00b94 commit 1b15483deb3f ("misc: add Qualcomm GENI SE QUP device driver") introduced support for platform-specific oversampling values, necessary to configure the UART clocks on all platforms at runtime. However it relies in probing a parent device. Despite the DM_FLAG_PRE_RELOC flag, this is not done consistently during boot. Instead, take another approach by relying on ofnode_ helpers to read the serial engine base address and do the read directly. This fixes early UART on boards with a non-default oversampling rate. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> 
commit 1b15483deb3f ("misc: add Qualcomm GENI SE QUP device driver")
introduced support for platform-specific oversampling values, necessary
to configure the UART clocks on all platforms at runtime. However it
relies in probing a parent device. Despite the DM_FLAG_PRE_RELOC flag,
this is not done consistently during boot.

Instead, take another approach by relying on ofnode_ helpers to read the
serial engine base address and do the read directly. This fixes early
UART on boards with a non-default oversampling rate.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
acpi: carve out qfw_acpi.c 2024-01-07T20:49:15+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2023-12-19T15:04:01+00:00 27a66fc3f3102bf88df5d7569e3aae88355c6e47 Move the code related to copying tables from QEMU to a separate code module. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> 
Move the code related to copying tables from QEMU to a separate code
module.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
rockchip: Port IO-domain driver for RK3568 from linux 2023-10-07T08:49:41+00:00 Jonas Karlman jonas@kwiboo.se 2023-08-21T22:30:28+00:00 09329df25f69f76751691c5a6d7a9e6f6567bc4c Port the Rockchip IO-domain driver for RK3568 from linux. The driver auto probe after bind to configure IO-domain based on the regulator voltage. Compared to the linux driver this driver is not notified about regulator voltage changes and only configure IO-domain based on the initial voltage autoset by the regulator. It is not recommended to enable MMC_IO_VOLTAGE or the mmc signal voltage and IO-domain may end up out of sync. Based on the linux commit 28b05a64e47c ("soc: rockchip: io-domain: add rk3568 support"). Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
Port the Rockchip IO-domain driver for RK3568 from linux.

The driver auto probe after bind to configure IO-domain based on the
regulator voltage. Compared to the linux driver this driver is not
notified about regulator voltage changes and only configure IO-domain
based on the initial voltage autoset by the regulator.

It is not recommended to enable MMC_IO_VOLTAGE or the mmc signal voltage
and IO-domain may end up out of sync.

Based on the linux commit 28b05a64e47c ("soc: rockchip: io-domain: add
rk3568 support").

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
imx: use generic name ele(EdgeLockSecure Enclave) 2023-07-13T09:29:40+00:00 Peng Fan peng.fan@nxp.com 2023-06-15T10:09:05+00:00 d3ee9dbd5984321d4a2932e19a59f455d8d90817 Per NXP requirement, we rename all the NXP EdgeLock Secure Enclave code including comment, folder and API name to ELE to align. Signed-off-by: Peng Fan <peng.fan@nxp.com> 
Per NXP requirement, we rename all the NXP EdgeLock Secure Enclave
code including comment, folder and API name to ELE to align.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
misc: add Qualcomm GENI SE QUP device driver 2023-05-02T18:23:58+00:00 Vladimir Zapolskiy vladimir.zapolskiy@linaro.org 2023-04-21T17:50:33+00:00 1b15483deb3f6e6975cdd13652a9b5ed2c81c42f This change adds a Qualcomm GENI SE QUP device driver as a wrapper for actually enabled and used serial devices found on a board. At the moment the driver is pretty simple, its intention is to populate childred devices and provide I/O mem read interface to them as clients, this is needed for GENI UART driver to set up a proper clock divider and provide the actually asked baud rate. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> 
This change adds a Qualcomm GENI SE QUP device driver as a wrapper for
actually enabled and used serial devices found on a board.

At the moment the driver is pretty simple, its intention is to populate
childred devices and provide I/O mem read interface to them as clients,
this is needed for GENI UART driver to set up a proper clock divider
and provide the actually asked baud rate.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
misc: Drop mc9sdz60 driver 2023-02-07T19:33:48+00:00 Simon Glass sjg@chromium.org 2023-02-01T20:19:34+00:00 e77e64b71abc98d06240e3ea9afcf9bfa05c0822 Drop this unused driver. Signed-off-by: Simon Glass <sjg@chromium.org> 
Drop this unused driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
misc: Drop ali512x 2023-02-07T19:33:47+00:00 Simon Glass sjg@chromium.org 2023-02-01T20:19:18+00:00 26de9a745c3948e97530076e9e0ef9b543638081 Drop this unused driver. Signed-off-by: Simon Glass <sjg@chromium.org> 
Drop this unused driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
misc: imx8ulp: move fuse.c from imx8ulp to sentinel 2022-07-26T09:29:01+00:00 Alice Guo alice.guo@nxp.com 2022-07-26T08:40:58+00:00 5d78ff733d647e694e803f87f2645a45229d1413 The i.MX93 platform wants to reuse drivers/misc/imx8ulp/fuse.c. Moving fuse.c from the folder imx8ulp to sentinel makes it can be used by other platforms. Signed-off-by: Alice Guo <alice.guo@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> 
The i.MX93 platform wants to reuse drivers/misc/imx8ulp/fuse.c. Moving
fuse.c from the folder imx8ulp to sentinel makes it can be used by other
platforms.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
misc: imx: S400_API: Move S400 MU and API to a common place 2022-07-26T09:29:00+00:00 Ye Li ye.li@nxp.com 2022-07-26T08:40:49+00:00 03fcf966511d11aa67c7b52d9d68c7bf18edade6 Since iMX9 uses S401 which shares the API with iMX8ULP. So move S400 MU driver and API to a common place and selected by CONFIG_IMX_SENTINEL Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> 
Since iMX9 uses S401 which shares the API with iMX8ULP. So move S400
MU driver and API to a common place and selected by CONFIG_IMX_SENTINEL

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>