u-boot.git/drivers/misc, branch v2017.05

Drop the pdsp188x driver

2017-04-30T17:41:02+00:00

This is not used in U-Boot.

Signed-off-by: Simon Glass

mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP

2017-03-17T08:27:08+00:00

Update the mxc_ocotp driver to support i.MX7ULP.
The read/write sequence has some changes due to
PDN and OUT_STATUS registers added and TIME register is
removed. Also update the bank size and number.

Add is_mx7ulp macro in sys_proto.h

Signed-off-by: Peng Fan 
Signed-off-by: Ye Li 
Reviewed-by : Stefano Babic

cros_ec: i2c: Add support for version 3 of the EC protocol

2017-02-08T13:12:16+00:00

Add support for version 3 of the ec protocol. It basically works by
stitching some additional header in front (special command code),
and having a result and packet_length stitched on for the reply.

Signed-off-by: Moritz Fischer 
Cc: Simon Glass 
Cc: u-boot@lists.denx.de
Acked-by: Simon Glass 
Tested on snow:
Tested-by: Simon Glass

dm: core: Replace of_offset with accessor

2017-02-08T13:12:14+00:00

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass

cros_ec: i2c: Group i2c write / read into single transaction

2017-02-08T13:07:13+00:00

Replace dm_i2c_write() / dm_i2c_read() with transaction using
struct i2c_msg[2] in order to allow for i2c controller to detect
write/read cycle to emit a repeated start condition.

Signed-off-by: Moritz Fischer 
Cc: Simon Glass 
Cc: u-boot@lists.denx.de
Acked-by: Simon Glass 
Tested on snow:
Tested-by: Simon Glass

x86: Use unsigned long for address in table generation

2017-02-06T03:38:46+00:00

We should use unsigned long rather than u32 for addresses. Update this so
that the table-generation code builds correctly on 64-bit machines.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

status_led: Kconfig migration

2017-01-21T20:12:33+00:00

Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.

TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.

Tested boards: CL-SOM-AM57x, CM-T335

Signed-off-by: Uri Mashiach

OCOTP: Update OCOTP driver to support i.MX6SLL

2016-12-16T10:38:24+00:00

Add the i.MX6SLL support to OCOTP driver.

The i.MX6SLL reuses the i.MX6ULL fuse, bank 7 and bank8 have 4 words
each, and there is a hole between bank 5 and bank 6.

Signed-off-by: Ye Li 
Signed-off-by: Peng Fan

cmd: crosec: Move cros_ec_decode_region helper to cmd/cros_ec.c

2016-12-03T04:04:48+00:00

The cros_ec_decode_region() function is only used in combination
with the crosec cmds. Move the function to the correct place.

Signed-off-by: Moritz Fischer 
Cc: Simon Glass 
Cc: Masahiro Yamada 
Cc: u-boot@lists.denx.de
Acked-by: Simon Glass

Merge git://git.denx.de/u-boot-dm

2016-10-13T00:48:43+00:00