u-boot.git/drivers/misc, branch v2017.07-rc3

i2c_eeprom: add static to i2c_eeprom_std_ops/probe

2017-06-26T05:12:47+00:00

These are only used in drivers/mis/i2c_eeprom.c

Signed-off-by: Masahiro Yamada 
Reviewed-by: Bin Meng

powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

2017-06-16T14:14:55+00:00

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher

rockchip: efuse: add (misc) driver for RK3399 non-secure efuse block

2017-06-07T13:29:17+00:00

This adds a simple driver for reading the efuse block of the RK3399.
It should be easy enough to add drivers for other devices (e.g. the
RK3328, RK3368, etc.) by passing the device details via driver_data.

Unlike the kernel driver (using the nvmem subsystem), we don't expose
the efuse as multiple named cells, but rather as a linear memory that
can be read using misc_read(...).

The primary use case (as of today) is the generation of a 'serial#'
(and a 'cpuid#') environment variable for the RK3399-Q7 (Puma)
system-on-module.

Note that this adds a debug-only (i.e. only if DEBUG is defined)
command 'rk3399_dump_efuses' that dumps the efuse block's content.
N.B.: The name 'rk3399_dump_efuses' was intentionally chosen to
      include a SoC-name (together with a comment in the function) to
      remind whoever adds support for additional SoCs that this
      function currently makes assumptions regarding the size of the
      fuse-box based on the RK3399. The hope is that the function is
      adjusted to reflect any changes resulting from generalising the
      driver for multiple SoCs and is then renamed.

Signed-off-by: Philipp Tomsich 

Reviewed-by: Simon Glass

dm: Update the I2C eeprom driver for livetree

2017-06-01T13:03:15+00:00

Update this driver so that it works with livetree.

Signed-off-by: Simon Glass

cros_ec: Convert to support live tree

2017-06-01T13:03:11+00:00

Convert this driver to support the live device tree and remove the old
fdtdec support.

The keyboard is not yet converted.

Signed-off-by: Simon Glass

cros_ec: Fix debug() statement in ec_command_inptr()

2017-06-01T13:03:11+00:00

This prints out the wrong pointers. Fix it.

Signed-off-by: Simon Glass

dm: core: Update device_bind_driver_to_node() to use ofnode

2017-06-01T13:03:08+00:00

Adjust this function to us an ofnode instead of an offset, so it can be
used with livetree. This involves updating all callers.

Signed-off-by: Simon Glass

dm: Rename dev_addr..() functions

2017-06-01T13:03:01+00:00

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

   1. dev_read_addr...()    - works on devices, supports flat/live tree
   2. devfdt_get_addr...()  - current functions, flat tree only
   3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass

Kconfig: Drop CONFIG_SYS_I2C_DS4510_ADDR

2017-05-22T12:37:12+00:00

This is only used by one board and always set to 0x51. Drop this option.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini 
Reviewed-by: Heiko Schocher

Convert CONFIG_DS4510 to Kconfig

2017-05-22T12:37:08+00:00

This converts the following to Kconfig:
   CONFIG_DS4510

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini 
Reviewed-by: Heiko Schocher