u-boot.git/drivers/misc, branch v2019.07-rc1 Unnamed repository; edit this file 'description' to name the repository. misc: fs_loader: Replace label with DT phandle 2019-04-22T22:13:22+00:00 Tien Fong Chee tien.fong.chee@intel.com 2019-03-05T15:29:38+00:00 c1ef736e3d486b758c4cda36c24d9111c5733bb0 In previously label which will be expanded to the node's full path was used, and now replacing label with most commonly used DT phandle. The codes were changed accordingly to the use of DT phandle and supporting multiple instances. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> 
In previously label which will be expanded to the node's full path was
used, and now replacing label with most commonly used DT phandle. The
codes were changed accordingly to the use of DT phandle and supporting
multiple instances.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
misc: fs_loader: Add support for initializing block device 2019-04-22T22:12:58+00:00 Tien Fong Chee tien.fong.chee@intel.com 2019-01-31T11:34:13+00:00 db32a446f91b421f516e9d2f5f42970e3a90a723 Firmware loader would encounter problem if the block device is accessed before initializing it. This patch would adding the support of probing block device and initializing block before the block device is accessed by firmware loader. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Firmware loader would encounter problem if the block device is accessed
before initializing it. This patch would adding the support of probing
block device and initializing block before the block device is accessed by
firmware loader.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
configs: move CONFIG_MXC_OCOTP to Kconfig 2019-04-13T18:30:09+00:00 Marcel Ziswiler marcel.ziswiler@toradex.com 2019-03-25T16:24:57+00:00 0a6f625d65b25d995fe15b775a0bd26fb8c901e8 While commit 3e020f03e94f ("driver: misc: add MXC_OCOTP Kconfig entry") introduced a Kconfig entry it did not actually migrate all configurations to using it. As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on those architectures. Additionally, also enable it on ARCH_IMX8M and ARCH_VF610 where all current members enabled it through their legacy configuration header files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> 
While commit 3e020f03e94f ("driver: misc: add MXC_OCOTP Kconfig entry")
introduced a Kconfig entry it did not actually migrate all
configurations to using it.

As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on
those architectures. Additionally, also enable it on ARCH_IMX8M and
ARCH_VF610 where all current members enabled it through their legacy
configuration header files.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-boot 2019-04-12T19:43:19+00:00 Tom Rini trini@konsulko.com 2019-04-12T19:43:19+00:00 015289580f81733f7358227743e3e5881653a797 stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver 
stm32 patches for v2019.07-rc1
- Add trusted boot with TF-A for stm32mp1
- stm32mp1 dts files sync'ed with Linux version
- add STM32MP1 Discovery boards (DK1 and DK2)
- add STMFX gpio expander driver
- misc improvement for stm3mp1 supports
- rename stpmu1 to stpmic1 (official name)
- stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu)
- add STM32 FMC2 NAND flash controller driver
stpmic1: add NVM update support in fuse command 2019-04-12T14:09:13+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-02-04T10:26:22+00:00 31e45a1a9ea07a9c36ada6401e4631a765398c75 Add functions to read/update the non volatile memory of STPMIC1 (8 bytes-register at 0xF8 address) and allow access with fuse command (bank=1, word > 0xF8). For example: STM32MP> fuse read 1 0xf8 8 Reading bank 1: Word 0x000000f8: 000000ee 00000092 000000c0 00000002 Word 0x000000fc: 000000f2 00000080 00000002 00000033 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
Add functions to read/update the non volatile memory of STPMIC1
(8 bytes-register at 0xF8 address) and allow access
with fuse command (bank=1, word > 0xF8).

For example:

STM32MP> fuse read 1 0xf8 8
Reading bank 1:

Word 0x000000f8: 000000ee 00000092 000000c0 00000002
Word 0x000000fc: 000000f2 00000080 00000002 00000033

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
misc: i2c_eeprom: add eeprom write support 2019-04-11T13:21:33+00:00 Baruch Siach baruch@tkos.co.il 2019-04-07T09:38:49+00:00 84c80c63d53bc8a7779b1e7e7084ee3b2d20e768 Write up to page size in each i2c transfer. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Heiko Schocher <hs@denx.de> 
Write up to page size in each i2c transfer.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Heiko Schocher <hs@denx.de>
misc: i2c_eeprom: support DT pagesize property 2019-04-11T13:21:33+00:00 Baruch Siach baruch@tkos.co.il 2019-04-07T09:38:48+00:00 a29034d1e6d1c1535055f455b5af5906a7edbc04 Read the page size from DT when available. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Heiko Schocher <hs@denx.de> 
Read the page size from DT when available.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Heiko Schocher <hs@denx.de>
xilinx: common: Remove !DM_i2C code for reading mac from eeprom 2019-02-14T13:31:10+00:00 Michal Simek michal.simek@xilinx.com 2019-01-22T14:55:46+00:00 027b1134b20b253b71de306738ed8d2d3f8ddc21 All platforms are converted to DM_I2C that's why there is no reason to keep this code here. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de> 
All platforms are converted to DM_I2C that's why there is no reason to
keep this code here.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
misc: Allow child devices 2019-02-09T19:50:22+00:00 Simon Glass sjg@chromium.org 2018-12-27T20:24:36+00:00 e5d611671d10f66b992d74d1769a954c90abd287 Allow misc devices to have children, so that we can use this uclass for cases where a child device (e.g. I2S) needs to access a misc driver for transferring data. Signed-off-by: Simon Glass <sjg@chromium.org> 
Allow misc devices to have children, so that we can use this uclass for
cases where a child device (e.g. I2S) needs to access a misc driver for
transferring data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Merge tag 'u-boot-imx-20190129' of git://git.denx.de/u-boot-imx 2019-01-30T12:22:12+00:00 Tom Rini trini@konsulko.com 2019-01-30T12:22:12+00:00 748ad078eefea2ee5a3c8e53ca46e9e93c2fc7f1 For 2019.04 
For 2019.04