u-boot.git/drivers/mmc/Kconfig, branch next

Kconfig: drivers: restyle remaining

2026-06-25T21:00:58Z

Restyle all Kconfigs for the rest of "drivers": Menu entries : no space left Menu attributes: 1 TAB Help text : 1 TAB + 2 spaces Replace '---help---' by 'help' Signed-off-by: Johan Jonker [trini: Add missing indentation on a few more multi-paragraph help texts] Signed-off-by: Tom Rini

Merge patch series "arm: omap: Add back omap4 support"

2026-06-17T15:52:33Z

Bastien Curutchet says: This series aims to add back the omap4 support. This support was removed by commit b0ee3fe642c ("arm: ti: Remove omap4 platform support") because at that moment, none of the OMAP4-based boards had done the migration to DM_I2C. My use case is an old product based on the Variscite's omap4 system on module. I needed to upgrade U-Boot on it for security reasons. I think that this work could benefit to other people who may have same kind of product to maintain. Patch 1 to 3 remove the omap's clock driver dependency to the AM33xx as it is also present in omap4 platforms. I tested these changes on the beaglebone black to ensure I didn't break the AM33xx case. Patch 4 & 5 revert the deletion of the omap4 support. The revert makes checkpatch.pl angry. I fixed quite a lots of warnings already but it remains two kinds of warnings: - CamelCase on timings structure, I left the CamelCase because IMHO it's more readable this way. - #ifdef CONFIG_XYZ shouldn't be used anymore. I left one of this because I didn't find a clean way to get rid of it. Patch 6 adds support for the Variscite's system on module. This system on module is supported by the Linux project through ti/omap/omap4-var-som-om44.dtsi Link: https://lore.kernel.org/r/20260608-omap4-support-v3-0-8595ccd203f0@bootlin.com

arm: ti: Introduce back omap4 support

2026-06-17T15:50:36Z

omap4 support was dropped by b0ee3fe642c ("arm: ti: Remove omap4 platform support") because the supported boards hadn't done the conversion to CONFIG_DM_I2C in time. It still exists some omap4-based products and they could benefit from the latest U-Boot support for obvious security reasons. Revert part of b0ee3fe642c to introduce back a minimal support for the omap4 platform. Fix the checkpatch's warning/errors induced by this revert. Following warnings are still present: | arch/arm/include/asm/arch-omap4/clock.h:445: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? | arch/arm/mach-omap2/omap4/hwinit.c:24: WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible | arch/arm/mach-omap2/omap4/sdram_elpida.c:142: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:143: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:144: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:145: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:146: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:147: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:148: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:149: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:150: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:151: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:152: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:153: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:154: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:155: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:156: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:157: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:158: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:159: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:209: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:210: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:213: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:215: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:216: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:217: CHECK: Avoid CamelCase: I didn't find an clean way to fix the "don't use #ifdef" warning as we need to define the gpio_bank for the SPL build only. For the CamelCase warnings, the incriminated attributes represent timings, so IMHO, it is more readable with CamelCase. Set myself as OMAP4 maintainer. Signed-off-by: Bastien Curutchet

mmc: Kconfig: allows m68k to use esdhc imx driver

2026-05-04T20:19:49Z

Allow cpu families as mcf5441x (m68k) to use the fsl_esdhc_imx driver since the hardware ip module is the same. Signed-off-by: Angelo Dureghello --- Changes in v2: - moved before menuconfig changes

core: Rework REGMAP symbols implementation

2026-03-30T22:59:35Z

As exposed by "make randconfig", we have an issue with the dependencies for REGMAP (and xPL variants). As this is a library function, it should always be selected and not depended on by other functionality. This is largely done correctly today, so just correct the few outliers. Acked-by: Anshul Dalal Signed-off-by: Tom Rini

mmc: mmc_spi: Select CRC16 if CRC checking is enabled

2026-01-08T14:05:53Z

Currently CRC16 is not selected when CRC checking is enabled and if it wasn't enabled in the config otherwise the build will fail because of references to crc16_ccitt() that doesn't exist. Signed-off-by: Daniel Palmer Signed-off-by: Peng Fan

Merge tag 'u-boot-imx-master-20250717' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

2025-07-17T17:42:46Z

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27088 - Add support for the i.MX95 B0 version. - Enable standard boot for phycore-imx8mp. - Kconfig fixes for i.MX MMC and FSL_SEC_MON. - Support 4Gb single die variant of the i.MX8MM Venice board.

mmc: Remove unused kona_sdhci driver

2025-07-17T17:39:07Z

As no platforms use this driver anymore, remove it. Signed-off-by: Tom Rini Signed-off-by: Peng Fan

mmc: Tighten some mmc driver dependencies

2025-07-17T17:39:07Z

A large number of mmc drivers cannot build without access to some platform specific header files. Express those requirements in Kconfig as well. Signed-off-by: Tom Rini Acked-by: Peng Fan Signed-off-by: Peng Fan

arm: imx: Remove unused mxcmmc driver

2025-07-17T12:57:23Z

As no platforms use this driver anymore, remove it. Signed-off-by: Tom Rini