u-boot.git/drivers/mmc/Makefile, branch v2012.10

ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

2012-09-27T18:20:10Z

- Convert the non-relocation part of board_init_f to spl_board_init, turn on CONFIG_SPL_BOARD_INIT in the configs. - Remove duplicated code. - Add spl_boot_device() that returns the statically chosen boot device. Signed-off-by: Tom Rini

SPL: Move the omap SPL framework to common/spl

2012-09-27T16:49:59Z

Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini

da850/omap-l138: Add support to read u-boot image from MMC/SD

2012-09-01T12:58:09Z

DA850/OMAP-L138 does not support strict MMC/SD boot mode. SPL will be in SPI flash and U-Boot image will be in MMC/SD card. SPL will do the low level initialization and then loads the u-boot image from MMC/SD card. Define CONFIG_SPL_MMC_LOAD macro in the DA850/OMAP-L138 configuration file to enable this feature. Tested-by: Christian Riesch Signed-off-by: Lad, Prabhakar Signed-off-by: Rajashekhara, Sudhakar Signed-off-by: Hadli, Manjunath

mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*

2012-07-07T12:07:20Z

In anticipation of Tegra3 support, continue removing/renaming Tegra2-specific files. No functional changes (yet). Updated copyrights to 2012. Signed-off-by: Tom Warren

mmc: support the sdhci instead of s5p_mmc for samsung-soc

2012-05-08T23:02:22Z

In driver mmc, generic s5p_sdhci code is implemented. s5p_mmc file is dupulicated. we are good that use the generic sdhci. This patch supported the sdhci for Samsung-SoC. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Lei Wen Acked-by: Minkyu Kang

ATMEL: remove old atmel_mci driver

2012-03-13T11:06:42Z

All boards are using the gen_atmel_mci driver now, so no need to carry the old driver around. Signed-off-by: Sven Schnelle Signed-off-by: Andreas Bießmann

iMX28: Add SSP MMC driver

2011-11-11T10:36:56Z

Signed-off-by: Marek Vasut Cc: Andy Fleming Cc: Stefano Babic Cc: Wolfgang Denk Cc: Detlev Zundel Acked-by: Andy Fleming

PXA: Add MMC driver using the generic MMC framework

2011-11-03T07:14:58Z

Signed-off-by: Marek Vasut

ftsdc010: add support of ftsdc010 mmc controller

2011-09-04T23:03:02Z

Faraday FTSDC010 controller is a SD/MMC controller for SoC chip. Signed-off-by: Macpaul Lin

OMAP3: Remove legacy mmc driver

2011-09-04T09:36:18Z

Now that all platforms have been migrated to the new MMC driver, remove the old one. Signed-off-by: Tom Rini Signed-off-by: Sandeep Paulraj