u-boot.git/drivers/mmc/Makefile, branch v2013.07

Merge branch 'u-boot/master' into 'u-boot-arm/master'

2013-05-30T12:45:06Z

Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c

mmc: update Faraday FTSDC010 for rw performance

2013-05-15T23:18:15Z

Faraday FTSDC010 is a MMC/SD host controller. Although there is already a driver in current u-boot release, which is modified from eSHDC and contributed by Andes Tech. Its performance is too terrible on Faraday A36x SoC platforms, so I turn to implement this new version of driver which is 10+ times faster than the old one. It's carefully designed to be compatible with Andes chips, so it should be safe to replace it. Signed-off-by: Kuo-Jung Su CC: Andy Fleming Signed-off-by: Andy Fleming

drivers/mmc: move spl_mmc.c to common/spl

2013-05-15T12:41:03Z

The mpc85xx repuires a special layout on the memory device that is connected to the eSDHC controller interface. But the file spl_mmc.c didn't handle this specfic case, there needs a special treatmen, in the powerpc drictory. So, there is no longer to keep spl_mmc.c on mpc85xx, CONFIG_SPL_FRAMEWORK is not set. When CONFIG_SPL_MMC_SUPPORT is set and CONFIG_SPL_FRAMEWORK is not set, there was an error in drivers/mmc/spl_mmc.c: drivers/mmc/libmmc.o:(.got2+0x8): undefined reference to `spl_image'. Now, the solution is to move the file "spl_mmc.c" to directory "common/spl". Signed-off-by: Ying Zhang

sdhci: Add sdhci support for spear devices

2013-05-06T21:26:24Z

Signed-off-by: Vipin Kumar Acked-by: Stefan Roese Acked-by: Jaehoon Chung Signed-off-by: Andy Fleming

mmc: Add support for Xilinx Zynq sdhci controller

2013-04-30T09:39:27Z

Add support for SD, MMC and eMMC card on Xilinx Zynq. Signed-off-by: Michal Simek Reviewed-by: Tom Rini

mmc: add bcm2835 driver

2013-03-20T14:31:25Z

This adds a simple driver for the BCM2835's SD controller. Workarounds are implemented for: * Register writes can't be too close to each-other in time, or they will be lost. * Register accesses must all be 32-bit, so implement custom accessors. This code was extracted from: git://github.com/gonzoua/u-boot-pi.git master which was created by Oleksandr Tymoshenko. Portions of the code there were obviously based on the Linux kernel at: git://github.com/raspberrypi/linux.git rpi-3.6.y commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley. swarren changed the following for upstream: * Removed hack udelay()s in bcm2835_sdhci_raw_writel(); setting SDHCI_QUIRK_WAIT_SEND_CMD appears to solve the issues. * Remove register logging from read*/write* functions. * Sort out confusion with min/max_freq values passed to add_sdhci(). * Use more descriptive variable names and calculations in IO accessors. * Simplified and commented twoticks_delay calculation. * checkpatch fixes. Cc: Andy Fleming Signed-off-by: Oleksandr Tymoshenko Signed-off-by: Stephen Warren Acked-by: Andy Fleming

EXYNOS: mmc: support DesignWare Controller for Samsung-SoC

2012-11-27T23:26:47Z

Support DesignWare MMC Controller for Samsung Specific. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Rajeshawari Shinde Signed-off-by: Andy Fleming

mmc: dw-mmc: support DesignWare MMC Controller

2012-10-22T07:56:25Z

Support the DesginWare MMC Controller. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Rajeshawari Shinde Signed-off-by: Andy Fleming

mmc: pxa: Remove the old non-generic PXA MMC driver

2012-10-22T07:56:25Z

This driver is no longer used and it's remaining users were converted to the new generic PXA MMC driver. Thus, remove this driver. Signed-off-by: Marek Vasut Cc: Andy Fleming Signed-off-by: Andy Fleming

ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

2012-09-27T18:20:10Z

- Convert the non-relocation part of board_init_f to spl_board_init, turn on CONFIG_SPL_BOARD_INIT in the configs. - Remove duplicated code. - Add spl_boot_device() that returns the statically chosen boot device. Signed-off-by: Tom Rini