u-boot.git/drivers/mmc/Makefile, branch v2018.03

mmc: Add bcm2835 sdhost controller

2018-01-28T17:27:32Z

The BCM2835 family of SoCs has 2 different SD controllers: One based on the SDHCI spec and a custom, home-grown one. This patch implements a driver for the latter based on the Linux driver. This is needed so that we can make use of device trees that assume driver presence of both SD controllers. Signed-off-by: Alexander Graf

mmc: add a Kconfig option to enable the support for MMC write operations

2018-01-12T09:11:24Z

This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot

nds32: mmc: Support ftsdc010 DM.

2017-11-30T01:59:09Z

Add nds32_mmc to support ftsdc010 dm flow. Signed-off-by: Rick Chen

mmc: Add MMC support for stm32h7 Socs

2017-09-28T11:23:19Z

This patch adds SD/MMC support for STM32H7 SoCs. Here is an extraction of SDMMC main features, embedded in STM32H7 SoCs. The SD/MMC block include the following: _ Full compliance with MultiMediaCard System Specification Version 4.51. Card support for three different databus modes: 1-bit (default), 4-bit and 8-bit. _ Full compatibility with previous versions of MultiMediaCards (backward compatibility). _ Full compliance with SD memory card specifications version 4.1. (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and UHS-II mode not supported). _ Full compliance with SDIO card specification version 4.0. Card support for two different databus modes: 1-bit (default) and 4-bit. (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and UHS-II mode not supported). _ Data transfer up to 208 Mbyte/s for the 8 bit mode. (depending maximum allowed IO speed). _ Data and command output enable signals to control external bidirectional drivers. The current version of the SDMMC supports only one SD/SDIO/MMC card at any one time and a stack of MMC Version 4.51 or previous. Signed-off-by: Christophe Kerello Signed-off-by: Patrice Chotard Reviewed-by: Simon Glass

dm: mmc: Allow disabling driver model in SPL

2017-08-01T02:58:00Z

At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass

samsung: mmc: Drop s3c_sdi driver

2017-06-05T15:02:30Z

This is no-longer used in U-Boot. Drop it. Signed-off-by: Simon Glass Reviewed-by: Jaehoon Chung

mmc: descend into drivers/mmc only when CONFIG_MMC is enabled

2017-05-15T09:28:23Z

This simplifies makefiles. Also, arrange the order of objects in drivers/mmc/Makefile so that the framework objects are listed before drivers. Signed-off-by: Masahiro Yamada

mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC

2017-05-15T09:28:23Z

Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig. We do not need two options for the same feature. Deprecate the former. This commit was generated with the sed script 's/GENERIC_MMC/MMC/' and manual fixup of drivers/mmc/Kconfig. Signed-off-by: Masahiro Yamada

drivers: remove Blackfin specific drivers

2017-04-18T14:29:14Z

These drivers have no user since commit ea3310e8aafa ("Blackfin: Remove"). Signed-off-by: Masahiro Yamada Reviewed-by: Simon Glass Acked-by: Michal Simek Acked-by: Jaehoon Chung

mmc: meson: add MMC driver for Meson GX (S905)

2017-04-14T06:16:06Z

This driver implements MMC support on Meson GX (S905) based systems. It's based on Carlo Caione's work, changes: - BLK support added - general refactoring Signed-off-by: Carlo Caione Signed-off-by: Andreas Färber Signed-off-by: Heiner Kallweit Tested-by: Vagrant Cascadian