u-boot.git/drivers/mmc/Makefile, branch v2018.09

board: arm: Add support for Broadcom BCM7445

2018-07-10T20:55:57Z

Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons Cc: Stefan Roese Cc: Tom Rini Cc: Florian Fainelli

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

mmc: tmio: Rename Matsushita to TMIO

2018-04-13T22:03:30Z

Synchronize the naming with Linux, call the common code TMIO. No functional change. Signed-off-by: Marek Vasut Cc: Jaehoon Chung Cc: Masahiro Yamada

mmc: renesas-sdhi: Add Renesas SDHI Kconfig entry

2018-04-11T21:11:56Z

Add Kconfig entry for the Renesas SDHI variant of the controller and split the Makefile entries accordingly. Signed-off-by: Marek Vasut Cc: Jaehoon Chung Cc: Masahiro Yamada

mmc: uniphier: Split out SoC specific bits from the driver

2018-04-11T21:11:56Z

Factor out common code from the uniphier SD driver, change the prefix of the functions from uniphier_sd_ to matsu_sd_ and create separate renesas-sdhi.c driver. Thus far, all the code is still compiled when CONFIG_UNIPHIER_MMC is selected and there is no functional change. This patch is a preparation for further split of the SoC specific parts of the Matsushita SD driver, used both on Uniphier and R-Car. Signed-off-by: Marek Vasut Cc: Jaehoon Chung Cc: Masahiro Yamada

mmc: ftsdc010: Merge nds32_mmc to ftsdc010

2018-03-30T05:13:45Z

nsd32_mmc was created to support ftsdc010 dm. It is not necessary to separate both, so merge it to ftsdc010. Signed-off-by: Rick Chen Signed-off-by: Rick Chen Cc: Greentime Hu

mmc: Add bcm2835 sdhost controller

2018-01-28T17:27:32Z

The BCM2835 family of SoCs has 2 different SD controllers: One based on the SDHCI spec and a custom, home-grown one. This patch implements a driver for the latter based on the Linux driver. This is needed so that we can make use of device trees that assume driver presence of both SD controllers. Signed-off-by: Alexander Graf

mmc: add a Kconfig option to enable the support for MMC write operations

2018-01-12T09:11:24Z

This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot

nds32: mmc: Support ftsdc010 DM.

2017-11-30T01:59:09Z

Add nds32_mmc to support ftsdc010 dm flow. Signed-off-by: Rick Chen

mmc: Add MMC support for stm32h7 Socs

2017-09-28T11:23:19Z

This patch adds SD/MMC support for STM32H7 SoCs. Here is an extraction of SDMMC main features, embedded in STM32H7 SoCs. The SD/MMC block include the following: _ Full compliance with MultiMediaCard System Specification Version 4.51. Card support for three different databus modes: 1-bit (default), 4-bit and 8-bit. _ Full compatibility with previous versions of MultiMediaCards (backward compatibility). _ Full compliance with SD memory card specifications version 4.1. (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and UHS-II mode not supported). _ Full compliance with SDIO card specification version 4.0. Card support for two different databus modes: 1-bit (default) and 4-bit. (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and UHS-II mode not supported). _ Data transfer up to 208 Mbyte/s for the 8 bit mode. (depending maximum allowed IO speed). _ Data and command output enable signals to control external bidirectional drivers. The current version of the SDMMC supports only one SD/SDIO/MMC card at any one time and a stack of MMC Version 4.51 or previous. Signed-off-by: Christophe Kerello Signed-off-by: Patrice Chotard Reviewed-by: Simon Glass