u-boot.git/drivers/mmc, branch v2015.07-rc2

sunxi: mmc: Enable pull-up on card-detect gpio pin

2015-06-04T12:08:28Z

On some boards we need to enable the internal pull-up te reliable detect that no card is inserted. Signed-off-by: Hans de Goede

Merge git://git.denx.de/u-boot-mpc85xx

2015-05-05T18:57:23Z

Merge branch 'master' of git://git.denx.de/u-boot-mmc

2015-05-05T11:00:38Z

ARM: mmc: bcm283x: Remove get_timer_us() from mmc driver

2015-05-05T09:29:42Z

The get_timer_us() function is something which is no longer existing in case we use generic timer framework, so replace it with get_timer(). Signed-off-by: Marek Vasut Cc: Stephen Warren Cc: Tyler Baker

tegra: mmc: Set the removable flag correctly

2015-05-05T09:29:42Z

If the mmc device is non-removable (as indicated by the device tree), set the flag so that users of the device know. Signed-off-by: Simon Glass Reviewed-by: Joe Hershberger

mmc: bcm2835_sdhci: Use calloc to allocate bcm2835_sdhci_host

2015-05-05T09:29:42Z

We need to clear the allocated memory explicitly as the included struct sdhci_host has function pointers. Those are compared to NULL to test if this (optional) feature is supported. Leaving them undefined let u-boot jump to arbitrary memory. Signed-off-by: Alexander Stein

mmc: fsl_esdhc: update eMMC44 adapter card erase timeout

2015-05-05T09:29:42Z

Freescale eMMC44 adapter card uses Micron N2M400FDB311A3CF eMMC memory. According to the silicon datasheet, secure erase timeout is 600ms. So increase erase timeout value from 250ms to 600ms. Signed-off-by: Yangbo Lu Cc: York Sun

mmc: sdhci: add timeout setting for response busy command

2015-05-05T09:29:42Z

Timeout interrupt also work for response busy command(R1b) like cmd38/cmd6. So need to set it accordingly. Current code only set timeout for data command. Signed-off-by: Kevin Liu Signed-off-by: Rob Herring Cc: Pantelis Antoniou

mmc: remove the MMC_MODE_HC flag

2015-05-05T09:29:36Z

High capacity support is not a host capability, but a device capability that is queried via the OCR. The flag in the operating conditions request argument can just be set unconditionally. This matches the Linux implementation. [panto] Hand merged and renumbering MMC_MODE_DDR_52MHz. Signed-off-by: Rob Herring Signed-off-by: Pantelis Antoniou Cc: Pantelis Antoniou

mmc: Fix splitting device initialization

2015-05-05T08:55:46Z

Starting part of device initialization sets the init_in_progress flag only if the MMC card did not yet come to ready state and needs to continue polling. If the card is SD or if the MMC card became ready quickly, the flag is not set and (if using pre-initialization) the starting phase will be re-executed from mmc_init function. Set the init_in_progress flag in all non-error cases. Also, move flags setting statements around so that the flags are not set in error paths. Also, IN_PROGRESS return status becomes unnecessary, so get rid of it. Signed-off-by: Andrew Gabbasov