u-boot.git/drivers/mmc, branch v2018.03-rc2

Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig

2018-02-09T00:09:03Z

config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini

Convert CONFIG_APBH_DMA et al to Kconfig

2018-02-08T17:48:11Z

This converts the following to Kconfig: CONFIG_APBH_DMA CONFIG_APBH_DMA_BURST CONFIG_APBH_DMA_BURST8 Signed-off-by: Adam Ford Reviewed-by: Stefan Agner [trini: Add in MMC as well] Signed-off-by: Tom Rini

mmc: fsl_esdhc: support SDR104 and HS200

2018-02-04T11:00:58Z

Introduce SDR104 and HS200 support The implementation takes linux kernel sdhci.c and sdhci-esdhc-imx.c as reference. - Implement esdhc_change_pinstate to dynamically change pad settings - Implement esdhc_set_timing - Implement esdhc_set_voltage to switch voltage - Implement fsl_esdhc_execute_tuning to execute time process - Enlarge the cfg->f_max to 200MHz. - Parse fsl,tuning-step, fsl,tuning-start-tap and fsl,strobe-dll-delay-target from device tree. - Parse no-1-8-v property - Introduce esdhc_soc_data to indicate the flags and caps Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Fabio Estevam Cc: Jaehoon Chung Reviewed-by: Jaehoon Chung

mmc: fsl_esdhc: add strobe and tuning entry

2018-02-04T11:00:58Z

Add entries that will be used for tuning control. The whole layout not changed, just expand reserved3[84] and rename other reservedx in sequence. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Fabio Estevam Cc: Jaehoon Chung Reviewed-by: Jaehoon Chung

mmc: fsl_esdhc: support i.MX8M

2018-02-04T11:00:58Z

Support i.MX8M in fsl esdhc driver. Signed-off-by: Peng Fan Reviewed-by: Stefano Babic Reviewed-by: Fabio Estevam

mmc: Add bcm2835 sdhost controller

2018-01-28T17:27:32Z

The BCM2835 family of SoCs has 2 different SD controllers: One based on the SDHCI spec and a custom, home-grown one. This patch implements a driver for the latter based on the Linux driver. This is needed so that we can make use of device trees that assume driver presence of both SD controllers. Signed-off-by: Alexander Graf

Merge git://git.denx.de/u-boot-spi

2018-01-26T12:46:34Z

mmc: Poll for broken card detection case

2018-01-24T07:12:03Z

Poll for broken card detection case instead of return no card detected. Signed-off-by: Jun Nie

mmc: fix to assign to correct clock value when clock is enabling

2018-01-24T07:08:27Z

When clock is enabling, it's assigned to 0 as mmc->clock. Then it can't initialize any card. Fix to assign to correct clock value as mmc->cfg->f_min or f_max. Fixes: 9546eb92cb6 ("mmc: fix the wrong disabling clock") Signed-off-by: Jaehoon Chung Tested-by: Guillaume GARDET Tested-by: Anand Moon Tested-by: Stephen Warren

wait_bit: use wait_for_bit_le32 and remove wait_for_bit

2018-01-24T06:33:43Z

wait_for_bit callers use the 32 bit LE version Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Daniel Schwierzeck Reviewed-by: Jagan Teki