u-boot.git/drivers/mmc, branch v2018.09-rc1

mmc: break out get_op_cond code to its own function

2018-07-23T08:17:04Z

This code is useful for testing the existance of devices that do not have card detect capabilities. This breaks out the core functionality and leaves the actual init logic and error reporting in mmc_start_init(). Signed-off-by: Jon Nettleton Signed-off-by: Baruch Siach Reviewed-by: Stefano Babic

mmc: stm32_sdmmc2: update pwron management

2018-07-19T20:31:35Z

Correctly manage the SDMMC reset and card cycle power to fully handle the power cycle added in the MMC uclass and avoid issue with level-shifter with some uSDCARD. 3 states managed in driver: 1/ reset: SDMMC disable, signal HiZ 2/ power-cycle: SDMMC disable, signals drive to 0 3/ power-on: SDMMC enabled Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard

dm: mmc: sunxi: Add A10/A20 compatible strings

2018-07-16T06:55:47Z

Commit dd27918c2252 ("dm: mmc: sunxi: Add support for driver model") only added the allwinner,sun5i-a13-mmc compatible string for this driver. The DM initialisation code here also works with (at least) A10 and A20, so add the appropriate compatible strings as per Linux 4.17's driver. Tested on A10 Cubieboard and A20 pcDuino3 Nano with CONFIG_DM_MMC. (A20 worked already, because sun7i-a20.dtsi specifies both the A13 and A20 strings.) Signed-off-by: Adam Sampson Acked-by: Maxime Ripard Reviewed-by: Jagan Teki

board: arm: Add support for Broadcom BCM7445

2018-07-10T20:55:57Z

Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons Cc: Stefan Roese Cc: Tom Rini Cc: Florian Fainelli

mmc: dwmmc: socfpga: Add reset ctrl to driver

2018-07-09T19:28:24Z

Add code to reset all reset signals as in mmc DT node. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: Ley Foon Tan Reviewed-by: Simon Glass

mmc: zynq: Fix tuning_loop_counter type in arasan_sdhci_execute_tuning()

2018-06-15T06:54:04Z

Code around tuning_loop_counter variable expects to go below zero. That's why this variable can't use unsigned type. Signed-off-by: Michal Simek

mmc: sdhci: Fix MMC HS200 tuning command failures

2018-06-15T06:54:04Z

This patch fixes the mmc tuning command failures when tuning pattern data needs to read back for comparision against the expected bit pattern. Reported-by: Masahiro Yamada Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek Tested-by: Masahiro Yamada

Merge branch 'master' of git://git.denx.de/u-boot-sh

2018-06-02T20:58:27Z

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

2018-06-01T17:50:15Z

Xilinx changes for v2018.07 second pull zynqmp: - Show reset reason - Remove emulation platform - Update pmufw version - Simplify mmc bootmode - Remove dc2 useless configuration file - Cleanup mini config - Defconfig syncup - zcu100, zcu104 and zcu111 dts fixes xilinx: - Use live-tree functions in some drivers - Add support for Avnet Minized and Antminer S9 fpga: - Add secure bitstream loading support mmc: - Add hs200 mode support usb xhci: - Header fix

mmc: renesas-sdhi: Add R8A77990 E3 compatible

2018-06-01T07:47:02Z

Add new compatible to the Uniphier SD driver for R8A77990 E3 SoC. Signed-off-by: Marek Vasut Cc: Masahiro Yamada Cc: Nobuhiro Iwamatsu