u-boot.git/drivers/mmc, branch v2022.01 Unnamed repository; edit this file 'description' to name the repository. Merge tag 'xilinx-for-v2022.01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze 2021-11-16T14:51:04+00:00 Tom Rini trini@konsulko.com 2021-11-16T14:51:04+00:00 2ffa0e87df3a7595f71d05782924ee83146d9fe7 Xilinx changes for v2022.01-rc3 sdhci: - Fix emmc mini case with missing firmware interface zynqmp: - Restore JTAG interface if required - Allow overriding board name - Add support for DLC21 - Fix one fallthrought statement description - Use config macro instead of name duplication - Save multiboot to variable firmware: - Handle ipi_req errors better - Use local buffer in case user doesn't need it instead of NULL/0 location spi: - gqsi: Fix write issue at low frequencies net: - gem: Disable broadcasts 
Xilinx changes for v2022.01-rc3

sdhci:
- Fix emmc mini case with missing firmware interface

zynqmp:
- Restore JTAG interface if required
- Allow overriding board name
- Add support for DLC21
- Fix one fallthrought statement description
- Use config macro instead of name duplication
- Save multiboot to variable

firmware:
- Handle ipi_req errors better
- Use local buffer in case user doesn't need it instead of NULL/0 location

spi:
- gqsi: Fix write issue at low frequencies

net:
- gem: Disable broadcasts
mmc: arm_pl180_mmci: Enable HWFC for specific versions of MCI 2021-10-29T09:22:32+00:00 Usama Arif usama.arif@arm.com 2021-10-19T14:49:48+00:00 c95b0297e95613fc68b1d92118ee64720d142f8c There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI. For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control needs to be enabled for multi block writes (MMC CMD 18). Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> 
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI.
For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
needs to be enabled for multi block writes (MMC CMD 18).

Signed-off-by: Usama Arif <usama.arif@arm.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
mmc: Fix mmc_switch excessive timeout 2021-10-29T09:22:32+00:00 Kirill Kapranov kirill.kapranov@compulab.co.il 2021-10-09T20:49:59+00:00 44645f87de513468a8c8082d057704df0495d7a4 Fix branching to avoid premature falling back on a long timeout instead of continuation of the initialization attempt. Clear of the comment to avoid the ambiguity. Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> 
Fix branching to avoid premature falling back on a long timeout instead
of continuation of the initialization attempt.

Clear of the comment to avoid the ambiguity.

Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Ye Li <ye.li@nxp.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
drivers: mmc: Add wait_dat0 support for sdhci driver 2021-10-29T09:22:32+00:00 Stephen Carlson stcarlso@linux.microsoft.com 2021-08-17T19:46:41+00:00 40e6f52454fc9adb6269ef8089c1fd2ded85fee8 Adds an implementation of the wait_dat0 MMC operation for the DM SDHCI driver, allowing the driver to continue when the card is ready rather than waiting for the worst case time on each MMC switch operation. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> 
Adds an implementation of the wait_dat0 MMC operation for the DM SDHCI
driver, allowing the driver to continue when the card is ready rather
than waiting for the worst case time on each MMC switch operation.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
drivers: mmc: Add wait_dat0 support for Freescale eSDHC driver 2021-10-29T09:22:32+00:00 Stephen Carlson stcarlso@linux.microsoft.com 2021-08-17T19:46:40+00:00 ee02543561d4d776b15ad1ad2f6430b361414102 Adds an implementation of the wait_dat0 MMC operation for the Freescale eSHDC driver, allowing the driver to continue when the card is ready rather than waiting for the worst case time on each MMC switch operation. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> 
Adds an implementation of the wait_dat0 MMC operation for the Freescale
eSHDC driver, allowing the driver to continue when the card is ready
rather than waiting for the worst case time on each MMC switch operation.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
mmc: sunxi: conditionally include MMC2 initialization code 2021-10-25T13:54:57+00:00 Icenowy Zheng icenowy@sipeed.com 2021-07-22T06:30:05+00:00 c846fe43f0561311eb7261b34023a04646cdbd0d Allwinner R329 has no MMC2. Only include the code of MMC2 if the base address of it is defined. Signed-off-by: Icenowy Zheng <icenowy@sipeed.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> 
Allwinner R329 has no MMC2.

Only include the code of MMC2 if the base address of it is defined.

Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
mmc: zynq_sdhci: Add xilinx_pm_request weak function 2021-10-21T06:50:59+00:00 T Karthik Reddy t.karthik.reddy@xilinx.com 2021-10-01T11:08:38+00:00 a3e3d4698e3c5812bba76cf0f35a0f71b27d5973 Mini emmc does not use any pmufw and ZYNQMP_FIRMWARE is disabled. xilinx_pm_request() will not be compiled and causes undefined reference to `xilinx_pm_request' error. So add a weak function in zynq_sdhci.c file. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/1633086518-32636-1-git-send-email-t.karthik.reddy@xilinx.com Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Mini emmc does not use any pmufw and ZYNQMP_FIRMWARE is disabled.
xilinx_pm_request() will not be compiled and causes undefined reference to
`xilinx_pm_request' error. So add a weak function in zynq_sdhci.c file.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/1633086518-32636-1-git-send-email-t.karthik.reddy@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Merge tag 'u-boot-imx-20211020' of https://source.denx.de/u-boot/custodians/u-boot-imx 2021-10-20T18:24:09+00:00 Tom Rini trini@konsulko.com 2021-10-20T18:24:09+00:00 79b8849d4c1e73df2a79a1d5a5f6166d0dd67a12 u-boot-imx-20211020 ------------------- First PR from u-boot-imx for 2022.01 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535 - new board: kontron-sl-mx8mm - imx8m: - fix secure boot - imx ESDHC: fixes - i.MX53: Support thum2, bmode and fixes for Menlo board usbarmory switch to Ethernet driver model - imx6 : - DDR calibration for Toradex boards - imx7: - Fixes - Updated gateworks boards (ventana / venice) # gpg verification failed. 
u-boot-imx-20211020
-------------------

First PR from u-boot-imx for 2022.01

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535

- new board: kontron-sl-mx8mm
- imx8m:
	- fix secure boot
- imx ESDHC: fixes
- i.MX53: Support thum2, bmode and fixes for Menlo board
	  usbarmory switch to Ethernet driver model
- imx6 :
	- DDR calibration for Toradex boards
- imx7:
	- Fixes
- Updated gateworks boards (ventana / venice)

# gpg verification failed.
mmc: rockchip_sdhci: enable strobe line for HS400 2021-10-15T12:57:41+00:00 Yifeng Zhao yifeng.zhao@rock-chips.com 2021-10-15T08:41:27+00:00 022f552704b6467966e4fad39c85a6aca9204c94 The default configuration of rk3399 EMMC PHY does not enable the strobe line, and EMMC controller will got data transmission error at HS400 mode. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
The default configuration of rk3399 EMMC PHY does not enable the
strobe line, and EMMC controller will got data transmission error
at HS400 mode.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
sunxi: Clean up inclusions of asm/arch/gpio.h 2021-10-11T09:46:44+00:00 Samuel Holland samuel@sholland.org 2021-09-11T21:50:47+00:00 425084610e08e344d43e0d142e72e65c9602379f As part of migrating to DM_GPIO and DM_PINCTRL, eventually we will remove the asm/arch/gpio.h header. In preparation, clean up the various files that include it. Some files did not contain any GPIO code at all, so this header was completely unused. A few files contained only legacy platform-specific GPIO code for setting up pin muxes. They were left unchanged, as that code will be completely removed by the DM_PINCTRL migration. The remaining files contain some combination of DM_GPIO and legacy GPIO code. For those, switch to including asm/gpio.h (if it wasn't included already). Right now, this header provides both sets of functions, because ARCH_SUNXI selects GPIO_EXTRA_HEADER. This will still be the right header to include once the DM_GPIO migration is complete and GPIO_EXTRA_HEADER is no longer needed. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> 
As part of migrating to DM_GPIO and DM_PINCTRL, eventually we will
remove the asm/arch/gpio.h header. In preparation, clean up the various
files that include it.

Some files did not contain any GPIO code at all, so this header was
completely unused.

A few files contained only legacy platform-specific GPIO code for
setting up pin muxes. They were left unchanged, as that code will be
completely removed by the DM_PINCTRL migration.

The remaining files contain some combination of DM_GPIO and legacy GPIO
code. For those, switch to including asm/gpio.h (if it wasn't included
already). Right now, this header provides both sets of functions,
because ARCH_SUNXI selects GPIO_EXTRA_HEADER. This will still be the
right header to include once the DM_GPIO migration is complete and
GPIO_EXTRA_HEADER is no longer needed.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>