u-boot.git/drivers/mmc, branch v2023.07.01

Merge tag 'xilinx-for-v2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

2023-06-12T20:42:37Z

Xilinx changes for v2023.10-rc1 global: - Use proper U-Boot project name Fix sparse warnings in zynqmp-clk, zynqmp handoff, board cmd: - Cover incorrect 0 length entries Versal NET: - Add bootmode logic - Support SPP production version - Add loadpdi command ZynqMP: - Clear pmufw node command ID handling - Change power domain behavior around zynqmp_pmufw_node() - Fix zynqmp cmd return values and pmufw command - Fix R5 tcm init and modes mmc: - Sync Versal NET emmc DT binding pcie: - Add support for ZynqMP PCIe root port video: - Add support for ZynqMP DP tools: - Fix debug message in relocate-rela

Merge tag v2023.07-rc4 into next

2023-06-12T18:55:33Z

Signed-off-by: Tom Rini

mmc: zynq: Sync with upstream DT binding

2023-06-12T11:24:31Z

Versal NET is not in production yet that's why no need to keep backward compatible with previously used compatible string. Link: https://lore.kernel.org/r/20230403102551.3763054-2-sai.krishna.potthuri@amd.com Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/0d355f4fbaf6a3521d41ee43f17dde2515ff7ab7.1684311766.git.michal.simek@amd.com

mmc: fix improper use of memset

2023-05-31T21:23:01Z

Buffers created through DEFINE_(CACHE_)ALIGN_BUFFER are actually pointers to the real underlying buffer. Using sizeof(...) is not appropriate in this case. Signed-off-by: Sam Edwards Reviewed-by: Peng Fan

mmc: rockchip_sdhci: Disable DMA mode using a device tree property

2023-05-18T00:34:45Z

Loading part of TF-A into SRAM from eMMC using DMA fails on RK3399 similar to other Rockchip SoCs. Checksum validation fails with: ## Checking hash(es) for Image atf-2 ... sha256 error! Bad hash value for 'hash' hash node in 'atf-2' image node spl_load_simple_fit: can't load image loadables index 1 (ret = -1) mmc_load_image_raw_sector: mmc block read error SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Add a device tree property, u-boot,spl-fifo-mode, to control when the rockchip_sdhci driver should disable the use of DMA and fallback on PIO mode. Same device tree property is used by the rockchip_dw_mmc driver. In commit 2cc6cde647e2 ("mmc: rockchip_sdhci: Limit number of blocks read in a single command") the DMA mode was disabled using a CONFIG option on RK3588. Revert that and instead disable DMA using the device tree property for all RK3588 boards, also apply similar workaround for all RK3399 boards. Fixes: 2cc6cde647e2 ("mmc: rockchip_sdhci: Limit number of blocks read in a single command") Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang Tested-by: Quentin Schulz # RK3399 Puma, RK3588 Tiger

mmc: rockchip_sdhci: Skip blocks read workaround on RK3399

2023-05-18T00:34:45Z

The workaround to limit number of blocks to read in a single command should only be applied to RK3568 and RK3588. Change to be more strict when to apply the workaround. Fixes: 2cc6cde647e2 ("mmc: rockchip_sdhci: Limit number of blocks read in a single command") Suggested-by: Simon Glass Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang Tested-by: Quentin Schulz # RK3399 Puma, RK3588 Tiger

Revert "mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B"

2023-05-15T21:14:46Z

This reverts commit a034ec06ff1d558bbe11d5ee05edbb4de3ee2215. Commit 4a3ea75de4c5 ("Revert "mmc: sdhci: set to INT_DATA_END when there are data"") reverted the alternative fix that was added for Exynos 4 devices, causing an error when trying to boot from an sdcard: <...> Loading Environment from MMC... sdhci_send_command: Timeout for status update! mmc fail to send stop cmd <...> Re-add the quirk to allow booting from sdcards again. Signed-off-by: Henrik Grimler

drivers: use devfdt_get_addr_index_ptr when cast to pointer

2023-05-06T09:28:18Z

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU can expect 64-bit data from the device tree parser, so use devfdt_get_addr_index_ptr instead of the devfdt_get_addr_index function in the various files in the drivers directory that cast to a pointer. As we are there also streamline the error response to -EINVAL on return. Signed-off-by: Johan Jonker Reviewed-by: Simon Glass

drivers: use dev_read_addr_ptr when cast to pointer

2023-05-06T09:28:18Z

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU can expect 64-bit data from the device tree parser, so use dev_read_addr_ptr instead of the dev_read_addr function in the various files in the drivers directory that cast to a pointer. As we are there also streamline the error response to -EINVAL on return. Signed-off-by: Johan Jonker Reviewed-by: Simon Glass

mmc: hi6220_dw_mmc: add compatible for HC2910 support

2023-05-03T13:05:24Z

It adds compatible "hisilicon,hi3798mv200-dw-mshc" for HC2910 SoC Hi3798MV200 to probe this mmc driver. Signed-off-by: Yang Xiwen