u-boot.git/drivers/mtd/nand/Makefile, branch v2016.09

mtd: nand: Add the sunxi NAND controller driver

2016-07-25T01:36:28Z

We already have an SPL driver for the sunxi NAND controller, now add the normal/standard one. The source has been copied from Linux 4.6 with a few changes to make it work in u-boot. Signed-off-by: Boris Brezillon Acked-by: Hans de Goede

mtd: nand: Remove docg4 driver and palmtreo680 flashing tool

2016-06-04T01:27:48Z

Commit ad4f54ea86b ("arm: Remove palmtreo680 board") removed the only user of the docg4 driver and the palmtreo680 image flashing tool. This patch removes them. Signed-off-by: Scott Wood Cc: Mike Dunn Cc: Simon Glass

mtd: nand: Remove jz4740 driver

2016-06-04T01:27:48Z

This driver is not used by anyone, remove it. Signed-off-by: Marek Vasut Cc: Daniel Schwierzeck Cc: Paul Burton Cc: Scott Wood Acked-by: Daniel Schwierzeck Signed-off-by: Scott Wood

arasan: nfc: Add initial nand driver support for arasan

2016-02-12T23:27:41Z

Added initial nand driver support for arasan nand flash controller.This supports nand erase,nand read, nand write This uses the hardware ECC for read and write operations ZynqMP uses this driver. Signed-off-by: Siva Durga Prasad Paladugu [scottwood: Fix checkpatch warnings] Signed-off-by: Scott Wood

arm: Remove nhk8815 boards and nomadik arch

2015-09-11T18:56:04Z

These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass

sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXI

2015-08-31T06:43:42Z

We eventually want to add full nand support, since it makes no sense to build SPL with nand support and u-boot without, or the other way around, a single option will suffice. Renaming the Kconfig option now makes things easier when we add full nand support in the future. The "obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o" is moved to an "ifdef CONFIG_SPL_BUILD" block in the Makefile. Signed-off-by: Hans de Goede Acked-by: Ian Campbell

mtd: nand: Add mvebu (PXA / AXP / A38x) NAND device driver

2015-08-26T03:53:58Z

Cloned from the Linux driver v4.2.0-rc2. Plus some patches from Antoine Tenart enabling controller initialization and ONFI timing support: http://lists.infradead.org/pipermail/linux-mtd/2015-July/060197.html Please note that this driver needs the Linux NAND subsystem sync to v4.1 from Scott to be applied: https://www.mail-archive.com/u-boot@lists.denx.de/msg175762.html Otherwise it will not compile. Tested on the Marvell Armada XP DB-MV784MP-GP eval board. Signed-off-by: Stefan Roese Cc: Antoine Tenart Cc: Ezeguil Garcia Cc: Luka Perkov Cc: Scott Wood

nand: Sync with Linux v4.1

2015-08-26T03:53:57Z

Update the NAND code to match Linux v4.1. The previous sync was from Linux v3.15 in commit 4e67c57125290b25. CONFIG_SYS_NAND_RESET_CNT is removed, as the upstream Linux code now has its own timeout. Plus, CONFIG_SYS_NAND_RESET_CNT was undocumented and not selected by any board. Signed-off-by: Scott Wood

nand: lpc32xx: add SLC NAND controller support

2015-08-13T00:47:33Z

The change adds support of LPC32xx SLC NAND controller. LPC32xx SoC has two different mutually exclusive NAND controllers to communicate with single and multiple layer chips. This simple driver allows to specify NAND chip timings and defines custom read_buf()/write_buf() operations, because access to 8-bit data register must be 32-bit aligned. Support of hardware ECC calculation is not implemented (data correction is always done by software), since it requires a working DMA engine. The driver can be included to an SPL image. Signed-off-by: Vladimir Zapolskiy Acked-by: Scott Wood Tested-by: Sylvain Lemieux

sunxi: nand: Add basic sunxi NAND driver for SPL with DMA support

2015-08-08T14:26:19Z

This driver adds NAND support to SPL. It was tested on Allwinner A20. Signed-off-by: Peter Gielda Signed-off-by: Tomasz Gorochowik Signed-off-by: Mateusz Holenko Signed-off-by: Piotr Zierhoffer Signed-off-by: Karol Gugala Acked-by: Hans de Goede Signed-off-by: Hans de Goede