u-boot.git/drivers/mtd/nand/raw, branch main

Merge tag 'u-boot-rockchip-2026.10-20260710' of https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip

2026-07-10T16:04:04Z

CI: https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/pipelines/597 - Add new rockchip custodian, - Remove inactive rockchip custodian, - Preemptively fix rk3528/rk356x DTS issue that will come with 7.1 upstream DTS sync, - Fix typo in doc, - Fix variable used before being set in rockchip_nfc, - Fix asm-operand-widths clang warning for RK3528, RK3576 and RK3588, - Work around HW undefined state for NVMEs on RK3588 Jaguar, - Added support for new devices: - LinkEase EasePi R1 - 9Tripod X3568 v4

mtd: nand: raw: rockchip_nfc: fix oobfree length calculation

2026-07-09T17:49:22Z

The oobfree[0].length calculation depends on the rknand->metadata_size value, but this is calculated after the function rk_nfc_ecc_init is called. Move this calculation to a location before it's value is required. Fixes: 1b3fcb3c0456 ("mtd: nand: raw: rockchip_nfc: add layout structure") Signed-off-by: Johan Jonker Tested-by: Hüseyin BIYIK Reviewed-by: Quentin Schulz Link: https://patch.msgid.link/12b6e0d5-637e-446e-9e4b-82c82e6fad40@gmail.com Signed-off-by: Quentin Schulz

mtd: nand: raw: sunxi: Convert to common field_{get, prep}() helpers

2026-07-08T19:29:18Z

Drop the driver-specific field_get() and field_prep() macros, in favor of the globally available variants from . Signed-off-by: Mikhail Kshevetskiy

mtd: nand: raw: sunxi: #undef field_{get, prep}() before definition

2026-07-08T19:29:18Z

Prepare for the advent of globally available common field_get() and field_prep() macros by undefining the symbols before defining local variants. This prevents redefinition warnings from the C preprocessor when introducing the common macros later. Signed-off-by: Mikhail Kshevetskiy

Kconfig: mtd: restyle

2026-06-25T20:53:19Z

Restyle all Kconfigs for "mtd": Menu entries : no space left Menu attributes: 1 TAB Help text : 1 TAB + 2 spaces Replace '---help---' by 'help' Signed-off-by: Johan Jonker [trini: Add missing indentation on a few more multi-paragraph help texts] Signed-off-by: Tom Rini

mtd: nand: pxa3xx: Pass valid dev to dev_err()

2026-06-10T09:23:26Z

info->controller.active is not initialised so the dev_err() call ends up dereferencing a null pointer causing a crash instead of outputting the error. Add a dev member to struct pxa3xx_nand_info and use that instead of info->controller.active->mtd.dev. Fixes: 661c98121d49 ("mtd: nand: pxa3xx: Fix not calling dev_xxx with a device") Signed-off-by: Chris Packham Reviewed-by: Stefan Roese

mtd: nand: raw: sunxi_spl: remove user data length reset

2026-05-01T12:49:44Z

No need to reset user data length registers in SPL. In SPL, only the first user data length register is used, so we don't need to reset all of them. Signed-off-by: Richard Genoud Acked-by: Andre Przywara

mtd: rawnand: sunxi: introduce variable user data length

2026-05-01T12:49:44Z

In Allwinner SoCs, user data can be added in OOB before each ECC data. For older SoCs like A10, the user data size was the size of a register (4 bytes) and was mandatory before each ECC step. So, the A10 OOB Layout is: [4Bytes USER_DATA_STEP0] [ECC_STEP0 bytes] [4bytes USER_DATA_STEP1] [ECC_STEP1 bytes] ... NB: the BBM is stored at the beginning of the USER_DATA_STEP0. Now, for H6/H616 NAND flash controller, this user data can have a different size for each step. So, we are maximizing the user data length to use as many OOB bytes as possible. Fixes: 7d1de9801151 ("mtd: rawnand: sunxi_spl: add support for H6/H616 nand controller") Fixes: f163da5e6d26 ("mtd: rawnand: sunxi: add support for H6/H616 nand controller") Signed-off-by: Richard Genoud

mtd: rawnand: sunxi: clean sunxi_nand_chip_init()

2026-05-01T12:49:37Z

In sunxi_nand_chip_init there's quite a lot of kfree/return, it's easy to forget a kfree(), so use a goto/kfree instead. Signed-off-by: Richard Genoud [Andre: rename goto label, keep return 0;] Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara

mtd: rawnand: sunxi: make the code mode self-explanatory

2026-04-30T22:35:59Z

In sunxi_nfc_hw_ecc_{read,write}_chunk(), the ECC step was force to 0, the reason is not trivial to get when reading the code. The explanation is that, from the NAND flash controller perspective, we are indeed at step 0 for user data length and ECC errors. Just add a const value with an explanation to clarify things. Signed-off-by: Richard Genoud Reviewed-By: Michael Trimarchi Acked-by: Andre Przywara