u-boot.git/drivers/mtd/nand, branch v2017.01

mtd: nand: mxs_nand_spl: Fix to remove twise 'NAND' print

2017-01-04T15:56:44Z

SPL from nand will print 'NAND' in boot_from_devices based on the image_loader name, remove the extra 'NAND ' in mxs_nand_spl driver. Original behaviour: ------------------- U-Boot SPL 2017.01-rc2-gf84dd8b (Jan 02 2017 - 22:24:19) Trying to boot from NANDNAND : 512 MiB After the fix: ------------- U-Boot SPL 2017.01-rc2-gf84dd8b-dirty (Jan 02 2017 - 23:17:00) Trying to boot from NAND: 512 MiB Cc: Tom Rini Signed-off-by: Jagan Teki

NAND: davinci: add support for NAND chips with 16 bits bus

2016-12-03T18:21:15Z

The OMAPL138-LCD board uses a NAND chip with a 16 bits bus. Add support into the davinci driver for 16 bit bus NAND chips. Signed-off-by: Fabien Parent Reviewed-by: Tom Rini

mtd: nand: add support for the TC58NVG2S0H chip

2016-11-28T20:10:30Z

Add the description of the Toshiba TC58NVG2S0H SLC nand to the nand_ids table so we can use the NAND ECC infos and the ONFI timings. Signed-off-by: Boris Brezillon Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

nand: arasan_nfc: Clear ecc on bit while sending read command

2016-11-15T14:27:57Z

Clear ecc ON bit while sending read command as all types of read command(like reading spare) doesnt need ECC to be enabled. It has been anyway taken care in other places whereever required using arasan_nand_enable_ecc(). Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

mtd: nand: zynq_nand: Add nand driver support for zynq

2016-11-15T14:27:50Z

Add nand flash controller driver support for zynq SoC. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

mtd: nand: Kconfig: Add NAND_MXS entry

2016-10-26T14:53:16Z

Added kconfig for NAND_MXS driver. Cc: Scott Wood Cc: Simon Glass Cc: Fabio Estevam Cc: Stefano Babic Cc: Peng Fan Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki

treewide: replace #include with

2016-09-23T21:55:42Z

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap ) Replace all include directives for with . Signed-off-by: Masahiro Yamada [trini: Fixup include/clk.] Signed-off-by: Tom Rini

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2016-09-09T13:45:32Z

mtd: nand: mxs: fix cache alignment for cache lines >32

2016-09-06T16:22:48Z

Currently the command buffer gets allocated with a size of 32 bytes. This causes warning messages on systems with cache lines bigger than 32 bytes: CACHE: Misaligned operation at range [9df17a00, 9df17a20] Define command buffer to be at least 32 bytes, but more if cache line is bigger. Signed-off-by: Stefan Agner Reviewed-by: Stefano Babic

nand: Fix some more NULL name tests

2016-09-02T01:08:48Z

Now that nand_info[] is an array of pointers we need to test the pointer itself rather than using name as a proxy for NULLness. Fixes: b616d9b0a708eb9 ("nand: Embed mtd_info in struct nand_chip") Signed-off-by: Scott Wood Cc: Lukasz Majewski Cc: Tony Lindgren Acked-by: Tony Lindgren