u-boot.git/drivers/mtd/spi, branch v2015.01

sf: sf_params: Add S25FL164K flash identifier info

2014-12-18T13:18:30Z

Add the necessary flash entry for the Spansion S25FL164K flash. Tested on Marvell 88F6218 based design. Signed-off-by: Ben Dooks Reviewed-by: Jagannadha Sutradharudu Teki

sf: sf_params: Add S25FL116K flash support

2014-12-18T13:15:35Z

Added S25FL116K flash and tested on Marvell 88F6281 based system. Signed-off-by: Adnan Ali Reviewed-by: Jagannadha Sutradharudu Teki

mtd/spi: Add support for SST25WF040B

2014-12-18T12:49:24Z

Add support for SST25WF040B-40I-SN flash. Tested on T1024QDS board. Signed-off-by: Shengzhou Liu Reviewed-by: Jagannadha Sutradharudu Teki

mtd: sf: Zap ramtron driver

2014-12-18T12:47:54Z

Removed ramtron driver since the EMK boards are no longer been active, and these are the only boards used this flash driver. Commit details for EMK zap: "ppc/arm: zap EMK boards" (sha1: d58a9451e7339ed4cf2b2627e534611f427fb791) Signed-off-by: Jagannadha Sutradharudu Teki Cc: Reinhard Meyer

sf: Enable byte program support

2014-12-13T22:08:04Z

Enabled byte program support for sst flashes in sf. Few controllers will only support BP, so this patch gives a tx transfer flag to set the BP so-that sf will operate on byte program transfer. A new TX operation mode SPI_OPM_TX_BP is introduced for such SPI controller to use byte program op for SST flash. Signed-off-by: Jagannadha Sutradharudu Teki Tested-by: Bin Meng

spi: sf: Support byte program for sst spi flash

2014-12-13T22:08:04Z

Currently if SST flash advertises SST_WP flag in the params table the word program command (ADh) with auto address increment will be used for the flash write op. However some SPI controllers do not support the word program command (like the Intel ICH 7), the byte programm command (02h) has to be used. Signed-off-by: Bin Meng Acked-by: Simon Glass Tested-by: Simon Glass Reviewed-by: Jagannadha Sutradharudu Teki

spi: Fix flag collision for SST_WP

2014-12-13T22:08:04Z

At present SECT_4K is the same as SST_WP so we cannot tell these apart. Fix this so that the table in sf_params.c can be used correctly. Reported-by: Jens Rottmann Signed-off-by: Simon Glass Reviewed-by: Jagannadha Sutradharudu Teki

sf: Fix look for the fastest read command

2014-12-13T22:08:04Z

Few of the spi controllers are only supports array slow read which is quite different behaviour compared to others. So this fix on sf will correctly handle the slow read supported controllers. Signed-off-by: Jagannadha Sutradharudu Teki Tested-by: Bin Meng

Merge git://git.denx.de/u-boot-dm

2014-11-24T17:01:48Z

Conflicts: drivers/serial/serial-uclass.c Signed-off-by: Tom Rini

linux/kernel.h: sync min, max, min3, max3 macros with Linux

2014-11-23T11:48:30Z

U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada Acked-by: Pavel Machek Acked-by: Lukasz Majewski Tested-by: Lukasz Majewski [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini