u-boot.git/drivers/mtd/ubi, branch v2020.01

crc32: Use the crc.h header for crc functions

2019-12-02T23:23:08Z

Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

ubi: Print skip_check in ubi_dump_vol_info()

2019-10-16T03:42:27Z

It might be interesting, if "skip_check" is set or not, so lets print this flag in ubi_dump_vol_info() as well. hs: fix typo in commit message Signed-off-by: Stefan Roese Cc: Quentin Schulz Cc: Boris Brezillon Cc: Heiko Schocher Reviewed-by: Heiko Schocher

ubi: provide a way to skip CRC checks

2019-10-16T03:42:27Z

Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Adapted to U-Boot by Stefan Roese. Signed-off-by: Quentin Schulz Signed-off-by: Stefan Roese Reviewed-by: Heiko Schocher Cc: Quentin Schulz Cc: Boris Brezillon

ubi: fix UBI_SILENCE_MSG

2019-07-09T05:00:23Z

- drop CONFIG_ prefix from kconfig entry - fix small compilation issue with CONFIG_UBI_SILENCE_MSG Signed-off-by: Markus Klotzbuecher Reviewed-by: Heiko Schocher Cc: Kyungmin Park

mtd: ubi: Remove select for non existent option

2019-05-10T11:18:13Z

There is no 'config CRC32' remove the select that was attempting to use it. Reported-by: Robert P. J. Day Signed-off-by: Chris Packham Reviewed-by: Heiko Schocher

mtd: ubi, ubifs debug: Use pr_debug instead of pr_crit

2019-04-09T05:46:42Z

Before printk.h was introduced and MTDDEBUG was removed, pr_crit() was calling MTDDEBUG(), which was since then replaced by the current pr_debug(). pr_debug is more appropriate here. Signed-off-by: Eran Matityahu Reviewed-by: Heiko Schocher

mtd: ubi debug: Remove the pid print from ubi_assert

2019-04-09T05:46:31Z

Add a new definition for ubi_assert and keep the original one in an ifndef __UBOOT__. Signed-off-by: Eran Matityahu Reviewed-by: Heiko Schocher

lib: Add hexdump

2018-06-13T11:49:12Z

Often during debugging session it's very interesting to see what data we were dealing with. For example what we write or read to/from memory or peripherals. This change introduces functions that allow to dump binary data with one simple function invocation like: ------------------->8---------------- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); ------------------->8---------------- which gives us the following: ------------------->8---------------- 00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35 ....baudrate=115 00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e 200.bootargs=con 00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30 sole=ttyS3,11520 00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00 0n8.bootdelay=3. 00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00 bootfile=uImage. 00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39 fdtcontroladdr=9 00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72 ffb1ba0.loadaddr 00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65 =0x82000000.stde 00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 rr=serial0@e0022 00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c 000.stdin=serial 000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75 0@e0022000.stdou 000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30 t=serial0@e00220 000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.............. ... ------------------->8---------------- Source of hexdump.c was copied from Linux kernel v4.7-rc2. Signed-off-by: Alexey Brodkin Cc: Anatolij Gustschin Cc: Mario Six Cc: Simon Glass Cc: Tom Rini Cc: Stefan Roese

mtd: ubi: Add missing newlines in ubi_init()

2018-06-06T08:25:13Z

I just stumbled over some cluttered UBI messages. It seems some newline chars are missing in the current U-Boot UBI source. Lets fix this in U-Boot as well (Linux has those fixes already). Signed-off-by: Stefan Roese Cc: Heiko Schocher

ubi: fastmap: Implement produce_free_peb()

2018-05-22T09:39:05Z

Since 'commit f82290afc847 ("mtd: ubi: Fix worker handling")', when booting from NAND, on a fresh NAND just after being flashed (and only in this case), we got the following log: ubi0: default fastmap pool size: 200 ubi0: default fastmap WL pool size: 100 ubi0: attaching mtd2 ubi0: scanning is finished ubi0 error: ubi_update_fastmap: could not find any anchor PEB ubi0 error: ubi_update_fastmap: could not find any anchor PEB ubi0 error: ubi_wl_get_peb: Unable to get a free PEB from user WL pool ubi0 error: autoresize: cannot auto-resize volume 1 UBI error: cannot attach mtd2UBI error: cannot initialize UBI, error -28UBI init error 28 After analysis, in ubi_wl_init(), when performing schedule_erase(), thread_enabled flag is not yet set to 1, which forbids ubi_do_worker() to execute pending works. This has to effect to not populate ubi->free with free physical eraseblocks. Following Richard Weinberger's advice, this patch has been backported from kernel tree : 'commit 1cb8f9776c7d ("ubi: fastmap: Implement produce_free_peb()")' Tested-by: Patrice Chotard Signed-off-by: Richard Weinberger Signed-off-by: Patrice Chotard Acked-by: Heiko Schocher