u-boot.git/drivers/mtd, branch v2013.07-rc1

Merge branch 'master' of git://git.denx.de/u-boot-spi

2013-06-13T19:18:35Z

sf: winbond: Correct the nr_blocks used for W25Q32DW

2013-06-13T18:12:46Z

This patch corrected the nr_blocks used for W25Q32DW SPI flash. nr_blcoks are incorrectly assigned on below patch "sf: winbond: add W25Q32DW" (sha1: 772ba15474f73adc942e817cc072b6e9750836cc) Signed-off-by: Jagannadha Sutradharudu Teki

sf: winbond: Add support for W25Q80BW

2013-06-13T18:12:46Z

Add support for Winbond W25Q80BW SPI flash. This patch corrected the flash name, nr_blocks and also commit message header from below patch. "sf: winbond: add W25Q32" (sha1: c969abc47033d6f810d3c9dbdb994ea9d691d038) Signed-off-by: Jagannadha Sutradharudu Teki

sf: spansion: Update the name for S25FL256S flash

2013-06-13T18:12:46Z

As the per the ID tabl the flash is under Uniform 64-kB sector architecture, hence updated with proper name. Signed-off-by: Jagannadha Sutradharudu Teki

bug, nand, am33xx: nand->ecc.strength not set in board_nand_init()

2013-06-04T16:50:04Z

commit dfe64e2c89731a3f9950d7acd8681b68df2bae03 Author: Sergey Lapin Date: Mon Jan 14 03:46:50 2013 +0000 mtd: resync with Linux-3.7.1 Introduced runtime bug: U-Boot 2013.04-00499-g46567df-dirty (Jun 04 2013 - 08:17:08) I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: BUG: failure at nand_base.c:3214/nand_scan_tail()! BUG! resetting ... on boards using drivers/mtd/nand/omap_gpmc.c as in board_nand_init() nand->ecc.strength is not set. Fix this! Signed-off-by: Heiko Schocher Cc: Sergey Lapin Cc: Scott Wood Cc: Tom Rini

cmd_sf: Add print mesgs on sf read/write commands

2013-06-02T18:34:41Z

This patch adds a print messages while using 'sf read' and 'sf write' commands to make sure that how many bytes read/written from/into flash device. Signed-off-by: Jagannadha Sutradharudu Teki Acked-by: Tom Rini

cmd_sf: Add print mesg for 'sf erase' command

2013-06-02T18:34:40Z

This patch adds a print messages while using 'sf erase' command to make sure that how many bytes erased in flash device. Signed-off-by: Jagannadha Sutradharudu Teki Acked-by: Tom Rini

sf: Fix sf read for memory-mapped SPI flashes

2013-06-02T18:34:40Z

Missing return after memcpy is done for memory-mapped SPI flashes, hence added retun 0 after memcpy done. The return is missing in below patch "sf: Enable FDT-based configuration and memory mapping" (sha1: bb8215f437a7c948eec82a6abe754c226978bd6d) Signed-off-by: Jagannadha Sutradharudu Teki Acked-by: Simon Glass

Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

2013-05-31T22:28:47Z

mtd: resync with Linux-3.7.1

2013-05-31T22:12:03Z

This patch is essentially an update of u-boot MTD subsystem to the state of Linux-3.7.1 with exclusion of some bits: - the update is concentrated on NAND, no onenand or CFI/NOR/SPI flashes interfaces are updated EXCEPT for API changes. - new large NAND chips support is there, though some updates have got in Linux-3.8.-rc1, (which will follow on top of this patch). To produce this update I used tag v3.7.1 of linux-stable repository. The update was made using application of relevant patches, with changes relevant to U-Boot-only stuff sticked together to keep bisectability. Then all changes were grouped together to this patch. Signed-off-by: Sergey Lapin [scottwood@freescale.com: some eccstrength and build fixes] Signed-off-by: Scott Wood