u-boot.git/drivers/mtd, branch v2016.01 Unnamed repository; edit this file 'description' to name the repository. Merge branch 'master' of git://git.denx.de/u-boot-spi 2016-01-07T17:41:57+00:00 Tom Rini trini@konsulko.com 2016-01-07T17:41:57+00:00 67ecb84ccbfd609170978833fd09b0b87fc4b630 






spi: spi_flash: Fix the arguments of stm_is_locked_sr()
2016-01-07T14:59:33+00:00

Fabio Estevam
fabio.estevam@nxp.com

2016-01-06T00:24:39+00:00

509215835944eb7ebd4b690d3f1b8fec7d78991d

stm_is_locked_sr() takes the status register (SR) value as the last
parameter, not the second.

Based on a patch from Brian Norris for the linux kernel:
http://git.infradead.org/linux-mtd.git/commit/a32d5b726ff8cf32bf491522b0ac8ae2545a063e

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>





stm_is_locked_sr() takes the status register (SR) value as the last
parameter, not the second.

Based on a patch from Brian Norris for the linux kernel:
http://git.infradead.org/linux-mtd.git/commit/a32d5b726ff8cf32bf491522b0ac8ae2545a063e

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>







UBI: Fix compile error when CONFIG_UBI_SILENCE_MSG defined
2016-01-04T08:11:10+00:00

Ladislav Michl
ladis@linux-mips.org

2016-01-03T21:05:03+00:00

6a4595600b968bafcae8ad603bfc1175b6efe1d8

drivers/mtd/ubi/io.c:1354:3: error: 'dump_len' undeclared (first use in
this function)
   dump_len = max_t(int, 128, len - i);

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>





drivers/mtd/ubi/io.c:1354:3: error: 'dump_len' undeclared (first use in
this function)
   dump_len = max_t(int, 128, len - i);

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>







altera_qspi: allow ctrl-c to abort the erase ops
2015-12-28T01:32:43+00:00

Thomas Chou
thomas@wytron.com.tw

2015-12-23T13:47:02+00:00

8e8106dcd540e4c735da6a0b71919747c15ce93a

Allow ctrl-c to abort the erase ops.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>





Allow ctrl-c to abort the erase ops.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>







altera_qspi: show erase progress
2015-12-28T01:32:43+00:00

Thomas Chou
thomas@wytron.com.tw

2015-12-23T12:41:49+00:00

d579d38f3f9df73057716168d0c52bac9a568760

Show sector erase progress with dot and comma.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>





Show sector erase progress with dot and comma.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>







altera_qspi: skip erase if the sector is blank
2015-12-28T01:32:43+00:00

Thomas Chou
thomas@wytron.com.tw

2015-12-23T02:33:52+00:00

f81a673ec4505553ce8d0362f9b8371a8e51c015

Skip erase if the sector is blank. The sector erase is slow, and
may take 0.7 sec typically or up to 3 sec worst-case.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>





Skip erase if the sector is blank. The sector erase is slow, and
may take 0.7 sec typically or up to 3 sec worst-case.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>







altera_qspi: set fail_addr for erase ops
2015-12-28T01:32:43+00:00

Thomas Chou
thomas@wytron.com.tw

2015-12-23T13:06:12+00:00

a1b1d7eceb033c256ae661d65732323809fb9101

If the erase fails, fail_addr might indicate exactly which block
failed. If fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not
at the device level or was not specific to any particular block.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>





If the erase fails, fail_addr might indicate exactly which block
failed. If fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not
at the device level or was not specific to any particular block.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>







altera_qspi: call callback even if the erase failed
2015-12-28T01:32:43+00:00

Thomas Chou
thomas@wytron.com.tw

2015-12-23T02:26:03+00:00

9e957aa4ce959faa89d31bc3ff401cc08bbc1013

Erase is an asynchronous operation.  Device drivers are supposed
to call instr->callback() whenever the operation completes, even
if it completes with a failure.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>





Erase is an asynchronous operation.  Device drivers are supposed
to call instr->callback() whenever the operation completes, even
if it completes with a failure.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>







altera_qspi: initialize instr.mtd in flash_erase
2015-12-19T01:51:19+00:00

Thomas Chou
thomas@wytron.com.tw

2015-12-18T13:35:08+00:00

1c0e84ca829a09948a61107744402296566aa076

Initialize instr.mtd in flash_erase(). This fixes the system
hang issue when CONFIG_MTD_PARTITIONS is selected.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>





Initialize instr.mtd in flash_erase(). This fixes the system
hang issue when CONFIG_MTD_PARTITIONS is selected.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>







sf: Rename sf_ops.c to spi-flash.c
2015-12-11T16:42:24+00:00

Jagan Teki
jteki@openedev.com

2015-12-06T17:59:02+00:00

cba65a77c4e75d6e1e3dcaa65b7d509f1a2bb95e

Since all spi-flash core operations are moved into
sf_ops.c then it's better to renamed as spi-flash.c

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>





Since all spi-flash core operations are moved into
sf_ops.c then it's better to renamed as spi-flash.c

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>