u-boot.git/drivers/mtd, branch v2020.01-rc4

common: Move old EEPROM functions into a new header

2019-12-02T23:25:25Z

These functions do not use driver model but are still used. Move them to a new eeprom.h header file. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move command functions out of common.h

2019-12-02T23:25:02Z

Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move enable/disable_interrupts out of common.h

2019-12-02T23:25:01Z

Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move interrupt functions into a new header

2019-12-02T23:25:00Z

These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move ARM cache operations out of common.h

2019-12-02T23:24:58Z

These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Tom Rini

crc32: Use the crc.h header for crc functions

2019-12-02T23:23:08Z

Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

nand: mxs_nand: add API for switching different BCH layouts

2019-11-03T20:49:19Z

On i.MX7 in a sake of reducing the disturbances caused by a neighboring cells in the FCB page in the NAND chip, a randomizer is enabled when reading the FCB page by ROM bootloader. Add API for setting BCH to specific layout (and restoring it back) used by ROM bootloader to be able to burn it in a proper way to NAND using nandbcb command. Signed-off-by: Igor Opaniuk Signed-off-by: Anti Sullin Tested-by: Max Krummenacher Reviewed-by: Oleksandr Suvorov

Merge tag 'u-boot-clk-23Oct2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-clk

2019-10-30T17:13:46Z

- Add I2C clocks for i.MX6Q CCF driver - Fix check in clk_set_default_parents() - Managed API to get clock from device tree - Fixes for core clock code (including sandbox regression tests)

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi

2019-10-30T13:04:52Z

- H6 dts(i) sync (Clément) - H6 PIO (Icenowy) - Fix pll1 clock calculation (Stefan) - H6 dram, half DQ (Jernej) - A64 OLinuXino eMMC (Sunil)

drivers: nand: brcmnand: fix nand_chip ecc layout structure

2019-10-25T15:20:43Z

The current brcmnand driver is based on 4.18 linux kernel which uses mtd_set_ooblayout to set ecc layout. But nand base code in u-boot is from old kernel which does not use this new API and expect nand_chip.ecc.layout structure to be set. This cause nand_scan_tail function running into a bug check if the device has a different oob size than the default ones. This patch ports the brcmstb_choose_ecc_layout function from kernel 4.6.7 that supports the ecc layout struture and replaces the mtd_set_ooblayout method Signed-off-by: William Zhang Reviewed-by: Philippe Reynes