u-boot.git/drivers/mtd, branch v2020.04

mtd: spi: Add Macronix MX25U3235F device

2020-04-02T21:30:02+00:00

Add Macronix MX25U3235F flash device description.
This is a 4MiB part.

Signed-off-by: Tom Warren

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

2020-02-28T11:04:10+00:00

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy 
Signed-off-by: Michal Simek

dma-mapping: move dma_map_(un)single() to

2020-02-19T13:27:30+00:00

The implementation of dma_map_single() and dma_unmap_single() is
exactly the same for all the architectures that support them.

Factor them out to , and make all drivers to
include  instead of .

If we need to differentiate them for some architectures, we can
move the generic definitions to .

Add some comments to the helpers. The concept is quite similar to
the DMA-API of Linux kernel. Drivers are agnostic about what is
going on behind the scene. Just call dma_map_single() before the
DMA, and dma_unmap_single() after it.

Signed-off-by: Masahiro Yamada

dma-mapping: fix the prototype of dma_unmap_single()

2020-02-19T13:27:30+00:00

dma_unmap_single() takes the dma address, not virtual address.

Signed-off-by: Masahiro Yamada

dm: core: Create a new header file for 'compat' features

2020-02-06T02:33:46+00:00

At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass

dm: core: Require users of devres to include the header

2020-02-06T02:33:46+00:00

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass 
Reviewed-by: Anatolij Gustschin

mtd: Rename free() to rfree()

2020-02-06T02:33:46+00:00

This function name conflicts with our desire to #define free() to
something else on sandbox. Since it deals with resources, rename it to
rfree().

Signed-off-by: Simon Glass

mtd: rawnand: denali_dt: use UCLASS_MTD instead of UCLASS_MISC

2020-01-31T16:14:32+00:00

UCLASS_MTD is a better fit for NAND drivers.

Make NAND_DENALI_DT depend on DM_MTD, which is needed to compile
drivers/mtd/mtd-uclass.c

Also, make ARCH_UNIPHIER select DM_MTD because all the defconfig
of this platform enables NAND_DENALI_DT.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Miquel Raynal

mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES based on DT compatible

2020-01-31T16:14:32+00:00

Currently, the denali NAND driver in U-Boot configures the
SPARE_AREA_SKIP_BYTES based on the CONFIG option.

Recently, Linux kernel merged a patch that associates the proper
value for this register with the DT compatible string.

Do likewise in U-Boot too.

The denali_spl.c still uses CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES.

Signed-off-by: Masahiro Yamada

mtd: rawnand: denali_dt: insert udelay() after reset deassert

2020-01-31T16:14:32+00:00

When the reset signal is de-asserted, the HW-controlled bootstrap
starts running unless it is disabled in the SoC integration.
It issues some commands to detect a NAND chip, and sets up registers
automatically. Until this process finishes, software should avoid
any register access.

Without this delay function, some of UniPhier boards hangs up while
executing nand_scan_ident(). (denali_read_byte() is blocked)

Signed-off-by: Masahiro Yamada