u-boot.git/drivers/net/Kconfig, branch v2017.11

sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users

2017-11-09T09:09:30Z

due misnaming of CONFIG_SUN4I_EMAC in include/configs/sunxi-common.h, likely missed in: commit 3146f0c017df ("Move PHYLIB to Kconfig") Signed-off-by: Artturi Alm Reviewed-by: Jagan Teki

net: Add SMC911X driver to Kconfig, convert

2017-10-21T01:40:26Z

We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini

ARM: mvebu: Convert CONFIG_MVNETA to Kconfig

2017-09-26T04:51:30Z

This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham Reviewed-by: Simon Glass Signed-off-by: Stefan Roese

net: move Broadcom SF2 driver to Kconfig

2017-08-07T20:18:30Z

move to Kconfig: CONFIG_BCM_SF2_ETH CONFIG_BCM_SF2_ETH_DEFAULT_PORT CONFIG_BCM_SF2_ETH_GMAC Also modified defconfigs of all platforms that use these configs. Signed-off-by: Suji Velupillai Tested-by: Suji Velupillai Reviewed-by: JD Zheng Reviewed-by: Scott Branden Signed-off-by: Steve Rae Reviewed-by: Tom Rini Acked-by: Joe Hershberger

powerpc, 8xx: move FEC Ethernet driver in drivers/net

2017-07-08T19:56:02Z

Signed-off-by: Christophe Leroy

net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable

2017-06-02T19:44:18Z

This change migrate the following configuration options for Kconfig: * PHY_GIGE, indicates that a controller (with an appropriate PHY) is Gigabit capable and enables extra support in the miiutil for parsing the status of Gigabit PHYs * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs, which previously had to enabled through a board-specific config file Signed-off-by: Philipp Tomsich Acked-by: Maxime Ripard Acked-by: Joe Hershberger

Merge branch 'master' of git://git.denx.de/u-boot-nds32

2017-05-26T15:18:53Z

Move FTMAC100 to where it should be, alphabetically in drivers/net/Kconfig Signed-off-by: Tom Rini Conflicts: drivers/net/Kconfig

nds32: eth: Support ftmac100 DM.

2017-05-23T05:48:27Z

Support Andestech eth ftmac100 device tree flow on AG101P/AE3XX platform. Verification: Boot linux kernel via dhcp and bootm ok. NDS32 # setenv bootm_size 0x2000000;setenv fdt_high 0x1f00000; NDS32 # dhcp 0x600000 10.0.4.97:boomimage-310y-ae300-spi.bin BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4899 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'boomimage-310y-ae300-spi.bin'. Load address: 0x600000 Loading: ################################################################# ################################################################# ################################################################# ... ... ################################### 233.4 KiB/s done Bytes transferred = 13872076 (d3abcc hex) NDS32 # dhcp 0x2000000 10.0.4.97:ae300.dtb BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4592 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'ae300.dtb'. Load address: 0x2000000 Loading: # 82 KiB/s done Bytes transferred = 2378 (94a hex) NDS32 # bootm 0x600000 - 0x2000000 Image Name: Created: 2017-03-22 6:52:03 UTC Image Type: NDS32 Linux Kernel Image (uncompressed) Data Size: 13872012 Bytes = 13.2 MiB Load Address: 0000c000 Entry Point: 0000c000 Verifying Checksum ... OK Booting using the fdt blob at 0x2000000 Loading Kernel Image ... OK Loading Device Tree to 01efc000, end 01eff949 ... OK Linux version 3.10.102-20375-gb0034c1-dirty (rick@app09) (gcc version 4.9.3 (2016-07-06_nds32le-linux-glibc-v3_experimental) ) #293 PREEMPT Wed Mar 22 14:49:28 CST 2017 CPU: NDS32 N13, AndesCore ID(wb), CPU_VER 0x0d11103f(id 13, rev 17, cfg 4159) ... ... Signed-off-by: rick

net: ravb: Add Renesas Ethernet RAVB driver

2017-05-21T19:38:24Z

Add driver for the Renesas Ethernet AVB block found in RCar H3/M3. Signed-off-by: Marek Vasut Cc: Hiroyuki Yokoyama Cc: Nobuhiro Iwamatsu Cc: Tom Rini Cc: Joe Hershberger Based on work of: Hiroyuki Yokoyama Takeshi Kihara Kazuya Mizuguchi

sunxi: Convert CONFIG_RGMII to Kconfig

2017-04-20T11:20:29Z

Convert CONFIG_RGMII to Kconfig. Thanks to that, it is possible to update defconfig files of SYS_EXTRA_OPTIONS accordingly and remove it when it is possible. Signed-off-by: Mylène Josserand Signed-off-by: Maxime Ripard