u-boot.git/drivers/net/Kconfig, branch v2019.01

net: add support for bcm6368-enet

2018-12-19T14:23:01Z

Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Daniel Schwierzeck

net: add support for bcm6348-enet

2018-12-19T14:23:00Z

Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Daniel Schwierzeck

driver: net: consolidate ti's code in separate folder

2018-11-05T16:41:59Z

Add drivers/net/ti/ folder and move all TI's code in this folder for better maintenance. Reviewed-by: Tom Rini Acked-by: Joe Hershberger Signed-off-by: Grygorii Strashko

net: ftgmac100: convert to driver model

2018-11-05T16:41:56Z

The driver is based on the previous one and the code is only adapted to fit the driver model. The support for the Faraday ftgmac100 controller is the same with MAC and MDIO bus support for RGMII/RMII modes. Configuration is updated to enable compile again. At this stage, the driver compiles but is not yet functional. Signed-off-by: Cédric Le Goater Reviewed-by: Joel Stanley Acked-by: Joe Hershberger

net: Add MT7628 ethernet driver

2018-11-05T16:41:56Z

This patch adds ethernet support for the MIPS based Mediatek MT76xx SoCs (e.g. MT7628 and MT7688), including a minimum setup of the integrated switch. This driver is loosly based on the driver version included in this MediaTek github repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git Tested on the MT7688 LinkIt smart-gateway and on the Gardena-smart-gateway. Signed-off-by: Stefan Roese Reviewed-by: Daniel Schwierzeck Cc: Joe Hershberger Cc: Frank Wunderlich Cc: Weijie Gao Acked-by: Joe Hershberger

net: fec_mxc: add support for i.MX8X

2018-10-24T19:45:38Z

Add compatible property and enable the FEC ipg clock when probing on i.MX8X. Add specific function for reading FEC clock rate via clock driver when configuring MII speed register. Allow FEC_MXC selection for i.MX8. Signed-off-by: Anatolij Gustschin Cc: Joe Hershberger Acked-by: Joe Hershberger

arm64: versal: Add support for new Xilinx Versal ACAPs

2018-10-16T14:53:21Z

Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek

Convert CONFIG_MII et al to Kconfig

2018-08-17T17:03:54Z

This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford Acked-by: Jagan Teki Acked-by: Joe Hershberger

net: designware: socfpga: Add Arria10 extras

2018-08-13T20:35:42Z

Add wrapper around the designware MAC driver to handle the SoCFPGA specific configuration bits. On Arria10, this is configuration of syscon phy_intf. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Ley Foon Tan Cc: Joe Hershberger

net: mvgbe: convert to DM

2018-07-26T19:08:21Z

Add driver model support to the mvgbe driver. As a temporary measure both DM and non-DM uses are supported. Once all the users have been converted the non-DM support can be dropped. Signed-off-by: Chris Packham Tested-by: Michael Walle Acked-by: Joe Hershberger