u-boot.git/drivers/net/Kconfig, branch v2022.04

net: brcm: netXtreme driver

2021-12-02T06:34:01Z

Broadcom bnxt L2 driver support. Used by the Broadcom iproc platforms. Signed-off-by: Bharat Gooty Reviewed-by: Ramon Fried Signed-off-by: Roman Bacik

drivers: net: add Aspeed MDIO driver

2021-11-23T07:57:56Z

Add a driver for the MDIO interface for Aspeed AST2600 SOC. The driver only supports clause 22 for now. Signed-off-by: Dylan Hung Reviewed-by: Ramon Fried Reviewed-by: Ryan Chen

net: dsa: add driver for NXP SJA1105 L2 switch

2021-11-23T07:57:56Z

The SJA1105 driver is largely reused from Linux. Its programming model is that it is blank out of reset, and it waits for a static configuration stream over SPI, which contains all runtime parameters (it has no notion of "default values"). Keeping a binary array for the configuration stream would have meant that aspects such as the CPU port and the MAC speeds could have not been configured easily, and would have been static and board-dependent. Live-patching the binary array means recalculating the static config table CRCs, which is not a fun process. So we create an abstraction over the static config tables, using the packing API, same as in Linux. The tables are kept as C structures, and the binary configuration stream is constructed on-the-go, with CRC and all. All static config tables instantiated in this driver are mandatory. The hardware reference manual can be found at: https://www.nxp.com/docs/en/user-guide/UM10944.pdf For tagging, a simplified version of tag_8021q from Linux is used. The VLAN EtherType is the same (0xdadb) but since we don't want switching in U-Boot, there is no reason to have a TX VLAN and an RX VLAN for each port. We just need the RX VLANs to act as the unique pvid of each front-panel port, to decode the switch port number. The RX VLAN is used for both RX and TX. The device tree bindings are the same as in Linux. Signed-off-by: Vladimir Oltean Reviewed-by: Ramon Fried

Convert CONFIG_MACB to Kconfig

2021-11-12T19:18:17Z

This converts the following to Kconfig: CONFIG_MACB Signed-off-by: Tom Rini

configs: fsl: migrate FMAN/QE specific defines to Kconfig

2021-11-09T11:48:23Z

Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat [Rebased] Signed-off-by: Priyanka Jain

Merge tag 'v2021.10-rc4' into next

2021-09-16T14:29:40Z

Prepare v2021.10-rc4 Signed-off-by: Tom Rini # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini " [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt

pci: Drop DM_PCI

2021-09-13T22:23:13Z

This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass

net: Move network rules to drivers/net

2021-09-04T16:51:47Z

The code under drivers/net is related to ethernet networking drivers, in some fashion or another. Drop these from the top-level Makefile and also move the phy rule into drivers/net/Makefile which is where it belongs. Make the new rule for drivers/net check for the build-stage relevant ETH symbol. Fix up some Kconfig dependencies while we're here to mirror how the Makefile logic now works. Signed-off-by: Simon Glass [trini: Introduce ETH, Kconfig dependency changes, am43xx fix] Signed-off-by: Tom Rini

Kconfig: Remove all default n/no options

2021-08-31T21:47:49Z

default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini

net: fec_mxc: support i.MX8ULP

2021-08-09T12:46:50Z

Support i.MX8ULP in fec_mxc Signed-off-by: Peng Fan Reviewed-by: Ramon Fried