u-boot.git/drivers/net/Kconfig, branch v2023.04Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/net/Kconfig?h=v2023.042023-02-10T18:41:07Znet: ftmac100: add mii read and write callbacks2023-02-10T18:41:07ZSergei Antonovsaproj@gmail.com2023-02-03T19:09:04Zurn:sha1:add396d66703c6c422353f950e584fae2a786a20
Register mii_bus with read and write callbacks to allow the 'mii'
command to work. Use a timeout of 10 ms to wait for the R/W
operations to complete.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Tested-by: Rick Chen <rick@andestech.com>
net: dwc_eth_qos: Add Qcom ethernet driver glue layer2023-02-10T17:50:00ZSumit Gargsumit.garg@linaro.org2023-02-01T13:58:55Zurn:sha1:d382025dc555b4e847877bb9b2d492ad1127d144
The Qualcom ETHQOS hardware supports an RGMII macro which needs to be
configured according to following link speeds:
- SPEED_1000
- SPEED_100
- SPEED_10
So add a corresponding glue driver to configure RGMII macro.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
net: add MV88E6xxx DSA driver2023-02-02T19:44:53ZTim Harveytharvey@gateworks.com2022-11-30T17:42:50Zurn:sha1:01e7dd050fc90358c64d990e146c9b0f86d6d563
Add a DSA driver for the MV88E6xxx compatible Ethernet switches.
Cc: Marek Behún <marek.behun@nic.cz>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
net: vsc9953: Remove this driver2022-12-22T15:31:49ZTom Rinitrini@konsulko.com2022-12-02T21:42:48Zurn:sha1:8747decc9bda5512c2d7eff4c7cab178e5ad6152
No platforms enable this driver as there's no T1040D4RDB nor T1040RDB
support at this time. Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig2022-12-22T15:31:48ZTom Rinitrini@konsulko.com2022-12-02T21:42:21Zurn:sha1:3a581af21af0bceb7e47650a19e3ddd3de87148a
This converts the following to Kconfig:
CONFIG_FLASH_SPANSION_S29WS_N
CONFIG_FLASH_VERIFY
CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
CONFIG_FSL_ISBC_KEY_EXT
CONFIG_FSL_TRUST_ARCH_v1
CONFIG_FSL_SDHC_V2_3
CONFIG_MAX_DSP_CPUS
CONFIG_MIU_2BIT_INTERLEAVED
CONFIG_SERIAL_BOOT
CONFIG_SPI_BOOTING
CONFIG_X86EMU_RAW_IO
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_DM9000_BYTE_SWAPPED et al to Kconfig2022-12-22T15:31:47ZTom Rinitrini@konsulko.com2022-12-02T21:42:18Zurn:sha1:9b0240f8c6a1caa42da73835090fcb6db60f3d23
This converts the following to Kconfig:
CONFIG_DM9000_BYTE_SWAPPED
CONFIG_DM9000_NO_SROM
CONFIG_DM9000_USE_16BIT
CONFIG_DM9000_DEBUG
CONFIG_MXC_GPT_HCLK
CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
Signed-off-by: Tom Rini <trini@konsulko.com>
net: Remove eth_legacy.c2022-12-07T21:04:17ZTom Rinitrini@konsulko.com2022-11-27T15:25:36Zurn:sha1:e524f3a449f58e2ef967fb9b64b01db3d099a27a
As there are no more non-DM_ETH cases for networking, remove this legacy
file and update the Makefile to match current usage.
Signed-off-by: Tom Rini <trini@konsulko.com>
net: Remove extraneous dependencies2022-12-07T17:20:17ZTom Rinitrini@konsulko.com2022-11-27T15:25:02Zurn:sha1:f6301702c1605184d2a72c0b453fd8846fc6c0d8
With DM_ETH being required now for all drivers, we don't need this
listed on individual drivers as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_VSC7385_ENET et al to Kconfig2022-12-05T21:08:38ZTom Rinitrini@konsulko.com2022-11-19T23:45:39Zurn:sha1:be3bea2ba33bc731dbca72576f8b30c587c2e3b3
This converts the following to Kconfig:
CONFIG_VSC7385_ENET
CONFIG_VSC9953
Signed-off-by: Tom Rini <trini@konsulko.com>
liteeth: LiteX Ethernet device2022-11-28T15:25:17ZJoel Stanleyjoel@jms.id.au2022-09-26T06:05:58Zurn:sha1:3167b4d72226ec4c65bc295c25893230608d2135
LiteX is a soft system-on-chip that targets FPGAs. LiteETH is a basic
network device that is commonly used in LiteX designs.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>