u-boot.git/drivers/net/Makefile, branch v2019.10-rc2

drivers: net: driver for MDIO muxes controlled over I2C

2019-07-25T18:13:30Z

This driver is used for MDIO muxes driven over I2C. This is currently used on Freescale LS1028A QDS board, on which the physical MDIO MUX is controlled by an on-board FPGA which in turn is configured through I2C. Signed-off-by: Alex Marginean Acked-by: Joe Hershberger Reviewed-by: Bin Meng

drivers: net: add NXP ENETC MDIO driver

2019-07-25T18:13:30Z

Adds a driver for the MDIO interface currently integrated in LS1028A SoC. This MDIO interface is shared by multiple ethernet interfaces and is presented as a stand-alone PCI function on the SoC ECAM. Ethernet has a functional dependency on MDIO, for simplicity there is a single config option for both. Signed-off-by: Alex Marginean Reviewed-by: Bin Meng Acked-by: Joe Hershberger

drivers: net: add NXP ENETC ethernet driver

2019-07-25T18:13:30Z

Adds a driver for NXP ENETC ethernet controller currently integrated in LS1028A. ENETC is a fairly straight-forward BD ring device and interfaces are presented as PCI EPs on the SoC ECAM. Signed-off-by: Catalin Horghidan Signed-off-by: Alex Marginean Reviewed-by: Bin Meng Acked-by: Joe Hershberger

test: dm: add a test for MDIO MUX DM uclass

2019-07-18T21:37:13Z

Adds a test using a makeshift MDIO MUX. The test is based on the existing MDIO test. It uses the last emulated PHY register to verify MUX selection. Signed-off-by: Alex Marginean Acked-by: Joe Hershberger Reviewed-by: Bin Meng

test: dm: add MDIO test

2019-07-15T18:32:25Z

A very simple test for DM_MDIO, mimicks a register write/read through the sandbox bus to a dummy PHY. Signed-off-by: Alex Marginean Reviewed-by: Bin Meng Tested-by: Bin Meng Acked-by: Joe Hershberger

net: add higmacv300 Ethernet driver for HiSilicon platform

2019-04-23T21:57:24Z

It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon SoCs like Hi3798CV200. It's based on a downstream U-Boot driver, but quite a lot of code gets rewritten and cleaned up to adopt driver model and PHY API. Signed-off-by: Shawn Guo Acked-by: Joe Hershberger

net: mscc: Move ocelot_switch to mscc_eswitch folder

2019-02-01T13:13:36Z

Move file ocelot_switch to mscc_eswitch to prepare to add new net drivers for other MSCC SoCs. Signed-off-by: Horatiu Vultur

net: add MSCC Ocelot switch support

2019-01-23T17:26:44Z

This patch adds support for the Microsemi Ethernet switch present on Ocelot SoCs. Signed-off-by: Gregory CLEMENT Reviewed-by: Daniel Schwierzeck

ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs

2019-01-14T22:43:18Z

This patch adds ethernet support for Mediatek ARM-based SoCs, including a minimum setup of the integrated switch. Cc: Joe Hershberger Signed-off-by: Mark Lee Signed-off-by: Weijie Gao Tested-By: "Frank Wunderlich"

net: add support for bcm6368-enet

2018-12-19T14:23:01Z

Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Daniel Schwierzeck