u-boot.git/drivers/net/Makefile, branch v2020.07 Unnamed repository; edit this file 'description' to name the repository. net: Add eth phy generic driver for shared MDIO 2020-05-10T11:24:48+00:00 Ye Li ye.li@nxp.com 2020-05-03T14:41:14+00:00 5fe419ef2a6154e83aab04c65ec906fef96eb5be For dual ethernet controllers, the HW design may connect ETH phys to one MDIO ports. So two different ethernet drivers have to share MDIO bus. Since two ethernet drivers are independent, we can't ensure their probe order. To resolve this problem, introduce an eth phy generic driver and uclass. After eth-uclass binds, we search the mdio node and binds the phy node with the eth-phy-generic driver. When one eth driver get its phy device, the parent of phy device will probe prior than phy device. So this ensure the eth driver ownes the MDIO bus will be probed before using its MDIO. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> 
For dual ethernet controllers, the HW design may connect ETH phys to
one MDIO ports. So two different ethernet drivers have to share MDIO bus.
Since two ethernet drivers are independent, we can't ensure their probe
order.

To resolve this problem, introduce an eth phy generic driver and uclass.

After eth-uclass binds, we search the mdio node and binds the phy node
with the eth-phy-generic driver.

When one eth driver get its phy device, the parent of phy device will
probe prior than phy device. So this ensure the eth driver ownes the
MDIO bus will be probed before using its MDIO.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
drivers: net: add Layerscape mEMAC MDIO driver 2020-04-29T05:19:20+00:00 Ioana Ciornei ioana.ciornei@nxp.com 2020-03-18T14:47:36+00:00 52e16ec6136424bc40727a9e43f23d718ae0c9db Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate
Ethernet Media Access Controller) and the Fman 10G Ethernet MACs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
net: Add support for Broadcom GENETv5 Ethernet controller 2020-01-29T17:30:33+00:00 Amit Singh Tomar amittomer25@gmail.com 2020-01-27T01:14:42+00:00 d53e3fa3853d5dad9ac4c39128cd08e0ae7a33ef The Broadcom GENET Ethernet MACs are used in several MIPS based SoCs and in the Broadcom 2711/2838 SoC used on the Raspberry Pi 4. There is no publicly available documentation, so this driver is based on the Linux driver. Compared to that the queue management is drastically simplified, also we only support version 5 of the IP and RGMII connections between MAC and PHY, as used on the RPi4. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> [Andre: heavy cleanup and a few fixes] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com> 
The Broadcom GENET Ethernet MACs are used in several MIPS based SoCs
and in the Broadcom 2711/2838 SoC used on the Raspberry Pi 4.
There is no publicly available documentation, so this driver is based
on the Linux driver. Compared to that the queue management is
drastically simplified, also we only support version 5 of the IP and
RGMII connections between MAC and PHY, as used on the RPi4.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
[Andre: heavy cleanup and a few fixes]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
drivers: net: add marvell MDIO driver 2019-09-04T16:37:19+00:00 Alex Marginean alexandru.marginean@nxp.com 2019-07-25T09:33:19+00:00 8bd37ce3cd7bd49a22156765c93ae5f23c480060 This patch adds a separate driver for the MDIO interface of the Marvell Ethernet controllers based on driver model. There are two reasons to have a separate driver rather than including it inside the MAC driver itself: *) The MDIO interface is shared by all Ethernet ports, so a driver must guarantee non-concurrent accesses to this MDIO interface. The most logical way is to have a separate driver that handles this single MDIO interface, used by all Ethernet ports. *) The MDIO interface is the same between the existing mv643xx_eth driver and the new mvneta/mvpp2 driver. Even though it is for now only used by the mvneta/mvpp2 driver, it will in the future be used by the mv643xx_eth driver as well. This driver supports SMI IEEE for 802.3 Clause 22 and XSMI for IEEE 802.3 Clause 45. This patch also adds device tree binding for marvell MDIO driver. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
This patch adds a separate driver for the MDIO interface of the
Marvell Ethernet controllers based on driver model. There are two
reasons to have a separate driver rather than including it inside
the MAC driver itself:
  *) The MDIO interface is shared by all Ethernet ports, so a driver
     must guarantee non-concurrent accesses to this MDIO interface. The
     most logical way is to have a separate driver that handles this
     single MDIO interface, used by all Ethernet ports.
  *) The MDIO interface is the same between the existing mv643xx_eth
     driver and the new mvneta/mvpp2 driver. Even though it is for now
     only used by the mvneta/mvpp2 driver, it will in the future be
     used by the mv643xx_eth driver as well.

This driver supports SMI IEEE for 802.3 Clause 22 and XSMI for IEEE
802.3 Clause 45.

This patch also adds device tree binding for marvell MDIO driver.

Signed-off-by: Ken Ma <make@marvell.com>
Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
drivers: net: driver for MDIO muxes controlled over I2C 2019-09-04T16:37:19+00:00 Alex Marginean alexandru.marginean@nxp.com 2019-07-16T08:21:17+00:00 74dd38386759dfef24a27d6e1b691d31b19aae07 This driver is used for MDIO muxes driven over I2C. This is currently used on Freescale LS1028A QDS board, on which the physical MDIO MUX is controlled by an on-board FPGA which in turn is configured through I2C. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
This driver is used for MDIO muxes driven over I2C.  This is currently
used on Freescale LS1028A QDS board, on which the physical MDIO MUX is
controlled by an on-board FPGA which in turn is configured through I2C.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Revert "drivers: net: driver for MDIO muxes controlled over I2C" 2019-09-04T16:37:19+00:00 Joe Hershberger joe.hershberger@ni.com 2019-09-03T23:14:06+00:00 bb53ae38de567e766289f383349879d73600b71c This reverts commit d9a9174fa5687521035b2ec82cce86cdcf4f36e6. 
This reverts commit d9a9174fa5687521035b2ec82cce86cdcf4f36e6.
drivers: net: driver for MDIO muxes controlled over I2C 2019-07-25T18:13:30+00:00 Alex Marginean alexandru.marginean@nxp.com 2019-07-16T08:21:17+00:00 d9a9174fa5687521035b2ec82cce86cdcf4f36e6 This driver is used for MDIO muxes driven over I2C. This is currently used on Freescale LS1028A QDS board, on which the physical MDIO MUX is controlled by an on-board FPGA which in turn is configured through I2C. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
This driver is used for MDIO muxes driven over I2C.  This is currently
used on Freescale LS1028A QDS board, on which the physical MDIO MUX is
controlled by an on-board FPGA which in turn is configured through I2C.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
drivers: net: add NXP ENETC MDIO driver 2019-07-25T18:13:30+00:00 Alex Marginean alexandru.marginean@nxp.com 2019-07-03T09:11:41+00:00 1d99534beffea9b8e54a2cf31776cff68c4fc676 Adds a driver for the MDIO interface currently integrated in LS1028A SoC. This MDIO interface is shared by multiple ethernet interfaces and is presented as a stand-alone PCI function on the SoC ECAM. Ethernet has a functional dependency on MDIO, for simplicity there is a single config option for both. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
Adds a driver for the MDIO interface currently integrated in LS1028A SoC.
This MDIO interface is shared by multiple ethernet interfaces and is
presented as a stand-alone PCI function on the SoC ECAM.
Ethernet has a functional dependency on MDIO, for simplicity there is a
single config option for both.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
drivers: net: add NXP ENETC ethernet driver 2019-07-25T18:13:30+00:00 Alex Marginean alexandru.marginean@nxp.com 2019-07-03T09:11:40+00:00 120b5ef2876c3a3aa2addaba0179791ddcbe8b58 Adds a driver for NXP ENETC ethernet controller currently integrated in LS1028A. ENETC is a fairly straight-forward BD ring device and interfaces are presented as PCI EPs on the SoC ECAM. Signed-off-by: Catalin Horghidan <catalin.horghidan@nxp.com> Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
Adds a driver for NXP ENETC ethernet controller currently integrated in
LS1028A.  ENETC is a fairly straight-forward BD ring device and interfaces
are presented as PCI EPs on the SoC ECAM.

Signed-off-by: Catalin Horghidan <catalin.horghidan@nxp.com>
Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
test: dm: add a test for MDIO MUX DM uclass 2019-07-18T21:37:13+00:00 Alex Marginean alexandru.marginean@nxp.com 2019-07-12T07:13:53+00:00 c3d9f3f899038e21a66e1e4a685abc0a5a1d5d9c Adds a test using a makeshift MDIO MUX. The test is based on the existing MDIO test. It uses the last emulated PHY register to verify MUX selection. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Adds a test using a makeshift MDIO MUX.  The test is based on the existing
MDIO test.  It uses the last emulated PHY register to verify MUX selection.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>