u-boot.git/drivers/net/Makefile, branch v2024.10

net: add Qualcomm ESS EDMA adapter

2024-07-25T23:53:12Z

This adds the driver for the ESS EDMA ethernet adapter found inside of Qualcomm IPQ40xx SoC series. This driver also integrates the built in modified QCA8337N switch support as they are tightly integrated. Co-Developed-by: Gabor Juhos Signed-off-by: Gabor Juhos Signed-off-by: Robert Marko

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03Z

As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

net: Add drivers for Sysnopsys Ethernet 10G device

2024-05-08T15:19:04Z

This driver support the Synopsys Designware Ethernet 10G IP block refer from the driver dwc_eth_qos. The driver MAC register mapping is different between Synopsys QoS IP and Synopsys 10G IP, and thus new file is created meant for Sysnopsys 10G IP. The dwc_eth_xgmac_socfpga.c is specific to a device family, the driver support the specific configuration used in Intel SoC FPGA Agilex5. This driver is extensible for other device family to use. Signed-off-by: Boon Khai Ng

net: dwc_eth_qos: Split STM32 glue into separate file

2024-04-19T09:30:50Z

Move STM32 glue code into separate file to contain the STM32 specific code outside of the DWMAC core code. No functional change. Reviewed-by: Patrice Chotard Signed-off-by: Marek Vasut Reviewed-by: Christophe ROULLIER

net: Add Amlogic GXL MDIO Mux driver

2023-12-19T10:24:38Z

Port the mdio-mux-meson-gxl.c Linux driver introduced in [1], and adapt it to U-Boot. This driver is needed to boot U-Boot with Linux DT since v6.4, since it switched the MDIO mux from the mmio to a proper GXL driver. [1] 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support") Link: https://lore.kernel.org/r/20231213-u-boot-gxl-mdio-mux-v2-1-c56bb02a75ea@linaro.org Signed-off-by: Neil Armstrong

m68k: Remove CONFIG_FSLDMAFEC

2023-11-07T19:50:51Z

There are no platforms which enable this feature, so remove it. Signed-off-by: Tom Rini

net: add hifemac_mdio MDIO bus driver for HiSilicon platform

2023-11-05T21:11:38Z

It adds the driver for the internal MDIO bus of HIFEMAC Ethernet controller. It's based on the mainstream linux driver. Signed-off-by: Yang Xiwen

net: add hifemac Ethernet driver for HiSilicon platform

2023-11-05T21:11:38Z

It adds the driver for HIFEMAC Ethernet controller found on HiSilicon SoCs like Hi3798MV200. It's based on the mainstream linux driver, but quite a lot of code gets rewritten and cleaned up to adopt u-boot driver model. Signed-off-by: Yang Xiwen

net: dwc_eth_qos: Add glue driver for GMAC on Rockchip RK3568

2023-10-07T08:49:41Z

Add a new glue driver for Rockchip SoCs, i.e RK3568, with a GMAC based on Synopsys DWC Ethernet QoS IP. rk_gmac_ops was ported from linux commit: 3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang Reviewed-by: Ramon Fried