u-boot.git/drivers/net/Makefile, branch v2026.01

net: mediatek: move MT7531 MMIO MDIO to dedicated driver

2025-10-22T09:16:10Z

In preparation for support of MDIO on AN7581, move the MT7531 MMIO logic to a dedicated driver and permit usage of the mdio read/write function to the mtk_eth driver. This only affect MT7988 that can use MMIO operation to access the Switch register. The MT7988 code is updated to make use of the external driver. This permits Airoha driver to make use of DM_MDIO to bind for the MT7531 driver that have the same exact register. Signed-off-by: Christian Marangi

arm: bcm281xx: Remove ethernet driver

2025-08-01T07:30:47Z

As no platforms enable the ethernet driver, remove it. Signed-off-by: Tom Rini

drivers: net: Add T-Head DWMAC glue layer

2025-07-17T06:37:40Z

The Designware IP integrated in TH1520 SoC requires extra clock configuration to operate correctly. The Linux kernel's T-Head DWMAC glue driver is ported and adapted to U-Boot's API. Signed-off-by: Yao Zi Acked-by: Leo Yu-Chi Liang

drivers: net: sandbox: add support for NET_LWIP

2025-04-23T08:02:49Z

Make the sandbox mock ethernet driver (drivers/net/sandbox.c) compatible with NET_LWIP by not relying on any of the structures or functions defined in net-legacy.h. This is done by providing local definitions of the various protocol structures (Ethernet, ARP, IPv4, ICMP). Drop the stub driver that was introduced specifically for NET_LWIP (drivers/net/sandbox-lwip.c). Signed-off-by: Jerome Forissier Reviewed-by: Simon Glass

net: airoha: Add Airoha Ethernet driver

2025-04-16T22:51:45Z

Add airoha Ethernet driver for Airoha AN7581 SoC. This is a majorly rewritten and simplified version of the Linux airoha_eth.c driver. It's has been modified to support a single RX/TX ring to reflect U-Boot implementation with recv and send API. The struct and the define are kept as similar as possible to upstream one to not diverge too much. The AN7581 SoC include an Ethernet Switch based on the Mediatek MT753x but doesn't require any modification aside from setting the CPU port and applying the Flood configuration hence it can be handled entirely in the Ethernet driver. Signed-off-by: Christian Marangi

net: Add support for ADI SC5xx SoCs with DWC QoS ethernet

2025-03-12T16:24:58Z

The ADI SC598 includes a Designware QoS 5.20a IP block. This commit adds support for using the existing ethernet QoS driver with the SC598 SoC. Co-developed-by: Ian Roberts Signed-off-by: Ian Roberts Co-developed-by: Nathan Barrett-Morrison Signed-off-by: Nathan Barrett-Morrison Signed-off-by: Vasileios Bimpikas Signed-off-by: Utsav Agarwal Signed-off-by: Arturs Artamonovs Signed-off-by: Oliver Gaskell Signed-off-by: Greg Malysa

Merge patch series "MediaTek ethernet driver refactor and updates"

2025-01-24T00:51:26Z

Weijie Gao says: This patch series will split the switch initialization code from mtk_eth driver into their own files and then add new SoC and switch support. Link: https://lore.kernel.org/r/cover.1736498083.git.weijie.gao@mediatek.com

net: mediatek: split ethernet switch code from mtk_eth.c

2025-01-24T00:46:42Z

mtk_eth.c contains not only the ethernet GMAC/DMA driver, but also some ethernet switch initialization code. As we may add more switch support in the future, it's better to move them out of mtk_eth.c to avoid increasing the code complexity. Since not all switches are supported for a particular board, Kconfig options are added to allow user to select which switch should be built into u-boot. If multiple switches are selected, auto-detecting can also be enabled. Signed-off-by: Weijie Gao

net: fsl_enetc: Add initial netc-blk-ctrl driver support

2025-01-20T11:40:39Z

The netc-blk-ctrl driver is used to configure Integrated Endpoint Register Block (IERB) and Privileged Register Block (PRB) of NETC. For i.MX platforms, it is also used to configure the NETCMIX block. The IERB contains registers that are used for pre-boot initialization, debug, and non-customer configuration. The PRB controls global reset and global error handling for NETC. The NETCMIX block is mainly used to set MII protocol and PCS protocol of the links, it also contains settings for some other functions. Note the IERB configuration registers can only be written after being unlocked by PRB, otherwise, all write operations are inhibited. A warm reset is performed when the IERB is unlocked, and it results in an FLR to all NETC devices. Therefore, all NETC device drivers must be probed or initialized after the warm reset is finished. Ported from Linux 6.13-rc as of commit fe5ba6bf91b3 ("net: enetc: add initial netc-blk-ctrl driver support") Signed-off-by: Marek Vasut

Bitbanging MDIO driver for DM framework.

2025-01-01T20:35:54Z

Linux DTS compatible MDIO bitbanging driver. Both clause 22 and clause 45 MDIO supported and validated. Heavily based on the Linux drivers (more or less the same code base). Signed-off-by: Markus Gothe