u-boot.git/drivers/net/altera_tse.c, branch master

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

net: Remove and add needed includes

2024-05-07T14:00:55+00:00

Remove  from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini

net: altera_tsa: Switch to new U-Boot PHY API

2023-06-10T11:34:05+00:00

Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut 
Reviewed-by: Ramon Fried

net: phy: don't require PHY interface mode during PHY creation

2022-04-10T05:44:13+00:00

Currently we require PHY interface mode to be known when
finding/creating the PHY - the functions
  * phy_connect_phy_id()
  * phy_device_create()
  * create_phy_by_mask()
  * search_for_existing_phy()
  * get_phy_device_by_mask()
  * phy_find_by_mask()
all require the interface parameter, but the only thing done with it is
that it is assigned to phydev->interface.

This makes it impossible to find a PHY device without overwriting the
set mode.

Since the interface mode is not used during .probe() and should be used
at first in .config(), drop the interface parameter from these
functions. Make the default value of phydev->interface (in
phy_device_create()) to be PHY_INTERFACE_MODE_NA. Move the interface
parameter to phy_connect_dev(), where it should be.

Change all occurrences treewide. In occurrences where we don't call
phy_connect_dev() for some reason (they only configure the PHY without
connecting it to an ethernet controller), set
  phydev->interface = value from phy_find_by_mask call.

Signed-off-by: Marek Behún 
Reviewed-by: Ramon Fried 
Reviewed-by: Vladimir Oltean

treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA

2022-04-10T05:44:13+00:00

Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make
it compatible with Linux' naming.

Signed-off-by: Marek Behún 
Reviewed-by: Stefan Roese 
Reviewed-by: Ramon Fried 
Reviewed-by: Vladimir Oltean

net: introduce helpers to get PHY interface mode from a device/ofnode

2022-04-10T05:44:12+00:00

Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the
"phy-mode" / "phy-connection-type" property. Add corresponding UT test.

Use them treewide.

This allows us to inline the phy_get_interface_by_name() into
ofnode_read_phy_mode(), since the former is not used anymore.

Signed-off-by: Marek Behún 
Reviewed-by: Ramon Fried 
Tested-by: Patrice Chotard

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42+00:00

Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include  at all, so
remove that include.

Signed-off-by: Simon Glass 
Signed-off-by: Tom Rini

dm: treewide: Rename ofdata_to_platdata() to of_to_plat()

2020-12-13T23:51:09+00:00

This name is far too long. Rename it to remove the 'data' bits. This makes
it consistent with the platdata->plat rename.

Signed-off-by: Simon Glass

dm: treewide: Rename dev_get_platdata() to dev_get_plat()

2020-12-13T23:51:09+00:00

Rename this to be consistent with the change from 'platdata'.

Signed-off-by: Simon Glass