u-boot.git/drivers/net/designware.c, branch v2016.09

meson: odroid-c2: enable Ethernet support through the device tree

2016-09-06T17:18:19+00:00

Remove the device definition from board file, update the driver with
the new compatible property and update config with necessary options.

Signed-off-by: Beniamino Galvani 
Reviewed-by: Simon Glass

net: designware: Make driver independent from DM_GPIO again

2016-07-06T15:45:00+00:00

Commit 90b7fc924adf "net: designware: support phy reset device-tree
bindings" made DW GMAC driver dependent on DM_GPIO by unconditional
usage of purely DM_GPIO stuff like:
 * dm_gpio_XXX()
 * gpio_request_by_name()

But since that driver as of today might be easily used without
DM_GPIO (that's the case for Synopsys AXS10x boards) we're
shielding all DM_GPIO things by ifdefs.

Signed-off-by: Alexey Brodkin 
Cc: Simon Glass 
Cc: Beniamino Galvani 
Cc: Joe Hershberger 
Cc: Sjoerd Simons 
Cc: Sonic Zhang 
Cc: Bin Meng 
Cc: Marek Vasut 
Reviewed-by: Simon Glass 
Acked-by: Joe Hershberger

Merge git://git.denx.de/u-boot-rockchip

2016-05-27T19:48:53+00:00

net: designware: fix descriptor layout and warnings on 64-bit archs

2016-05-27T19:39:46+00:00

All members of the DMA descriptor must be 32-bit, even on 64-bit
architectures: change the type to u32 to ensure this. Also, fix
other warnings.

Signed-off-by: Beniamino Galvani 
Acked-by: Joe Hershberger 
Reviewed-by: Simon Glass 
[trini: Use phys_addr_t not unsigned long long to test that we're within
DMA'able memory]
Signed-off-by: Tom Rini

net: designware: support phy reset device-tree bindings

2016-05-27T15:00:48+00:00

Add support for the snps,reset-gpio, snps,reset-active-low (optional) and
snps,reset-delays-us device-tree bindings. The combination of these
three define how the PHY should be reset to ensure it's in a sane state.

Signed-off-by: Sjoerd Simons 
Reviewed-by: Simon Glass

net: designware: Use dm_pci_mem_to_phys() in the probe routine

2016-02-05T04:47:23+00:00

Convert to use native DM PCI API dm_pci_mem_to_phys().

Signed-off-by: Bin Meng 
Reviewed-by: Simon Glass

Merge branch 'master' of git://git.denx.de/u-boot-net

2016-01-28T23:42:10+00:00

net/designware: add support of max-speed device tree property

2016-01-28T18:32:44+00:00

This property allows to specify fastest connection mode supported by
the MAC (as opposed to features of the phy).

There are situations when phy may handle faster modes than the
MAC (or even it's particular implementation or even due to CPU being too
slow).

This property is a standard one in Linux kernel these days and some
boards do already use it in their device tree descriptions.

Signed-off-by: Alexey Brodkin 
Cc: Bin Meng 
Cc: Joe Hershberger 
Cc: Sonic Zhang 
cc: Simon Glass 
Acked-by: Joe Hershberger

net/designware: do explicit port selection for 1Gb mode

2016-01-28T18:32:43+00:00

Current implementation only sets "port select" bit for non-1Gb mode.
That works fine if GMAC has just exited reset state but we may as well
change connection mode in runtime. Then we'll need to reprogram GMAC for
that new mode of operation and if previous mode was 10 or 100 Mb and new
one is 1 Gb we'll need to reset port mode bit.

Signed-off-by: Alexey Brodkin 
Cc: Bin Meng 
Cc: Joe Hershberger 
Cc: Sonic Zhang 
cc: Simon Glass 
Acked-by: Joe Hershberger

Fix GCC format-security errors and convert sprintfs.

2016-01-15T03:11:34+00:00

With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten 
Acked-by: Wolfgang Denk 
Reviewed-by: Tom Rini