When using DM_MDIO on SOC with more than one FEC and not sharing the MDIO
bus the name of the driver and the bus needs to be unique. Since name
used in device_bind_driver_to_node needs to be a static string, add the
string to the fec_priv struct and reuse fec_set_dev_name to generate the
name with the device sequence number.

Fixes: 3b8f99a3e762 ("net: fec: add support for DM_MDIO")

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>

If DM_MDIO is used and the FEC device is removed the mdio API
must not be used to remove the bus structure. Store pointer the
the udevice for MDIO bus created by dm_fec_bind_mdio and use DM
functions to cleanup the device in fecmxc_remove.

Fixes: 3b8f99a3e762 ("net: fec: add support for DM_MDIO")

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

priv->promisc is used as the parameter of the set_promisc() call
which accepts a bool type instead of char.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

This board has not been converted to CONFIG_DM by the deadline.
Remove it.  As this is the last ARCH_MX25 platform, remove those
references as well.

Cc: Matthias Weisser <weisserm@arcor.de>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>

Enabling promiscuous mode is necessary if FEC is the master of a DSA
switch driver where each port has their own MAC address.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As we move towards driver model, it is required to let the FEC driver
know how to properly deal with an Ethernet PHY subnode in the device tree.

For example:

 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
	phy-handle = <&phy>;
 	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		phy: ethernet-phy@0 {
			reg = <0>;
			qca,clk-out-frequency = <125000000>;
		};
	};
 };

Currently the PHY node pointer is incorrectly associated with the
Ethernel controller instead of the PHY node itself.

This causes the PHY properties, such as "qca,clk-out-frequency" in
the example above to not get parsed.

Fix this problem by populating the phy_of_node node.

Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Tom Rini <trini@konsulko.com>

imx_get_mac_from_fuse is used to load MAC address from fuse. On imx8mp,
we have two different ENET controllers and both need to call this
function. So decouple its declare from fec driver.

Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

This patch enables the possibility to set FEC_ENET_ENABLE_TXC_DELAY or
FEC_ENET_ENABLE_RXC_DELAY so one can via a define enable the RXC or TXC
delay in the MAC.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>