u-boot.git/drivers/net/fm, branch v2014.04

boards/t1040qds: Adds ethernet support for T1040

2014-02-03T16:38:48Z

Enable entherent for T1040QDS. It enables FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5 Define MDIO related configs Added eth.c file Update t1040.c to support RGMII and SGMII Update t1040qds.c to support ethernet Define the PHY address Signed-off-by: Arpit Goel Signed-off-by: Bhupesh Sharma Signed-off-by: Poonam Aggrwal Signed-off-by: Priyanka Jain Signed-off-by: Prabhakar Kushwaha [York Sun: remove dash from commit message] Signed-off-by: York Sun

net/fm: revert commit 732dfe090d50af53bb682d0c8971784f8de1f90f

2014-01-21T22:05:52Z

This patch reverts patch 'add ft_fixup_xgec to support 3rd and 4th 10GEC'. When dual-role MAC acts as 10G,it still uses fsl,fman-port-1g-rx/tx as before. Signed-off-by: Shengzhou Liu Acked-by: York Sun

powerpc/t2080qds: some update for t2080qds

2014-01-21T21:37:41Z

- add more serdes protocols support. - fix some serdes lanes route. - fix SGMII doesn't work and incorrect mdio display for XFI when serdes 0x6d. - correct boot location info for SD/SPI boot. Signed-off-by: Shengzhou Liu Reviewed-by: York Sun

net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC

2013-12-11T19:12:20Z

As mEMAC1 and mEMAC2 are dual-role MACs, which are used as 1G or 10G MAC. So we update dynamically 'cell-index' to '2' and '3' for 10GEC3 and 10GEC4. Also change 'fsl,fman-port-1g-rx' to 'fsl,fman-port-10g-rx', ditto for Tx. Signed-off-by: Shengzhou Liu Acked-by: York Sun

powerpc/mpc85xx: Add T2080/T2081 SoC support

2013-11-25T19:44:25Z

Add support for Freescale T2080/T2081 SoC. T2080 includes the following functions and features: - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz - 2MB L2 cache and 512KB CoreNet platform cache (CPC) - Hierarchical interconnect fabric - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving - Data Path Acceleration Architecture (DPAA) incorporating acceleration - 16 SerDes lanes up to 10.3125 GHz - 8 mEMACs for network interfaces (four 1Gbps MACs and four 10Gbps/1Gbps MACs) - High-speed peripheral interfaces - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz - Additional peripheral interfaces - Two serial ATA (SATA 2.0) controllers - Two high-speed USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Three eight-channel DMA engines - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T2080 and T2081: Feature T2080 T2081 1G Ethernet numbers: 8 6 10G Ethernet numbers: 4 2 SerDes lanes: 16 8 Serial RapidIO,RMan: 2 no SATA Controller: 2 no Aurora: yes no SoC Package: 896-pins 780-pins Signed-off-by: Shengzhou Liu Acked-by: York Sun

net/fman: Add support for 10GEC3 and 10GEC4

2013-11-25T19:43:47Z

There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu

drivers/net/fm: descend only when CONFIG_FMAN_ENET=y

2013-11-17T19:11:31Z

CONFIG_FMAN_ENET is defined only for CPU mpc85xx. We do not need to filter by CPU mpc85xx. Signed-off-by: Masahiro Yamada

powerpc/t1040: Update defines to support T1040SoC personalities

2013-11-13T20:41:08Z

T1040 Soc has four personalities: -T1040 (4 cores with L2 switch) -T1042:Reduced personality of T1040 without L2 switch -T1020:Reduced personality of T1040 with less cores(2 cores) -T1022:Reduced personality of T1040 with 2 cores and without L2 switch Update defines in arch/powerpc header files, Makefiles and in driver/net/fm/Makefile to support all T1040 personalities Signed-off-by: Poonam Aggrwal Signed-off-by: Priyanka Jain [York Sun: fixed Makefiles] Acked-by: York Sun

drivers: net: convert makefiles to Kbuild style

2013-10-31T17:22:13Z

Signed-off-by: Masahiro Yamada

net/fman: add a fm_enable_port function

2013-10-24T16:35:59Z

This can be useful if one wants to disable an interface in u-boot because u-boot should not manage it but then later reenable it for FDT fixing or if the kernel uses this interface. Signed-off-by: Valentin Longchamp [York Sun: fix conflict in fm_eth.h] Acked-by: York Sun