u-boot.git/drivers/net/fm, branch v2016.07

nand: Embed mtd_info in struct nand_chip

2016-06-04T01:27:48+00:00

nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.

This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip.  It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].

Signed-off-by: Scott Wood

powerpc:t4240: MAC9 and MAC10 should not be identified as 1G interface in some case

2016-05-25T00:11:03+00:00

When using rcw protocols to support 10G on MAC9 and MAC10, these MACs
should not be identified as 1G interface, otherwise, one MAC will be
listed as two Ethernet ports. For example, MAC9 will be listed as
FM1@TGEC1 and FM1@DTSEC9.

Signed-off-by: Ying Zhang 
Reviewed-by: York Sun

Kconfig: Move CONFIG_FIT and related options to Kconfig

2016-03-14T23:18:07+00:00

There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass 
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini

driver/fm: fdt.c: fix fdt_fixup_fman_firmware() to support ARM platforms

2016-02-24T16:51:13+00:00

Use fdt32_to_cpu() to convert the data correctly for both endianness
platforms.

Signed-off-by: Gong Qianyu 
Reviewed-by: York Sun

fm: fdt: Move fman ucode fixup to driver code

2016-02-24T16:51:13+00:00

Not only powerpc/mpc85xx but also Freescale Layerscape platforms will
use fdt_fixup_fman_firmware() to insert Fman ucode blob into the device
tree. So move the function to Fman driver code.

Signed-off-by: Gong Qianyu 
Reviewed-by: York Sun

qe: move drivers/qe/qe.h to include/fsl_qe.h

2016-02-24T16:51:13+00:00

As the QE firmware struct is shared with Fman, move the header file
out of drivers/qe/.

Signed-off-by: Gong Qianyu 
Reviewed-by: York Sun

Fix GCC format-security errors and convert sprintfs.

2016-01-15T03:11:34+00:00

With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten 
Acked-by: Wolfgang Denk 
Reviewed-by: Tom Rini

block: pass block dev not num to read/write/erase()

2016-01-14T02:05:18+00:00

This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren 
Reviewed-by: Tom Rini

net: fm: disables unused FM1-DTSEC1 MAC node in DTS

2015-12-17T00:52:19+00:00

We don't disable unused FM1-DTSEC1 MAC node in FMAN v2 since it is
used by MDIO. For FMAN v3, MDIO uses dedicated controller, so we
can disable unused FM1-DTSEC1 MAC node to avoid being probed in
Linux.

Signed-off-by: Shaohui Xie 
[York Sun: revised commit message]
Reviewed-by: York Sun

armv8/ls1043a: remove print info

2015-12-17T00:52:18+00:00

Remove verbose message for FMan port.

Signed-off-by: Mingkai Hu 
[York Sun: Added commit message]
Reviewed-by: York Sun