u-boot.git/drivers/net/fsl-mc/mc.c, branch v2017.03

drivers: net: fsl-mc: Fixup MAC addresses in DPC

2017-01-31T17:25:21Z

Fixup port_mac_address property in MC DPC with values from the u-boot environment. Since u-boot already reads the environment MAC addresses when probing the PHYs, use these values. The u-boot environment MAC addresses take precedence over any eventual ones defined in the DPC, except for the case where they are randomly assigned (no u-boot env value declared for port). The patch assumes the "/board_info/ports/" node is present in the DPC. Signed-off-by: Bogdan Purcareata Reviewed-by: Prabhakar Kushwaha [York S: Fix several indentations] Reviewed-by: York Sun

ls2080: Exit dpaa only right before exiting U-Boot

2016-11-17T13:18:55Z

On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf Reviewed-by: York Sun [agraf: Fix x86 build]

armv8: LS2080A: Consolidate LS2080A and LS2085A

2016-04-06T17:26:46Z

LS2080A is the primary SoC, and LS2085A is a personality with AIOP and DPAA DDR. The RDB and QDS boards support both personality. By detecting the SVR at runtime, a single image per board can support both SoCs. It gives users flexibility to swtich SoC without the need to reprogram the board. Signed-off-by: York Sun CC: Prabhakar Kushwaha Reviewed-by: Prabhakar Kushwaha

driver: net: fsl-mc: Free dflt_dpio pointer after its usage

2016-03-29T00:35:38Z

Free dflt_dpio pointer after its usage during error handling Signed-off-by: Prabhakar Kushwaha Reported-by: Jose Rivera Reviewed-by: York Sun

driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0

2016-03-21T19:42:15Z

Return value of get_mc_boot_status() in case of failure is not necessary to be -1. So update the error condition check. Signed-off-by: Prabhakar Kushwaha Reported-by: Yao Yuan Acked-by: Joe Hershberger Reviewed-by: York Sun

Use correct spelling of "U-Boot"

2016-02-06T11:00:59Z

Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang

driver: net: fsl-mc: Update print to reflect correct string

2016-02-01T17:11:11Z

Update printf with dpbp_exit to match with previous function call. Signed-off-by: Itai Katz Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun

driver: net: fsl-mc: Memset dprc_cfg before configuring

2016-02-01T17:11:11Z

All fields of struct dprc_cfg are not being configured while creating child container. "Not" configured fields are assumed to be 0. So memset dprc_cfg before configuring the fields. Signed-off-by: Itai Katz Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun

Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

2016-01-27T20:05:36Z

driver: net: fsl-mc: Remove portal id hard-coding

2016-01-27T16:13:12Z

Management Complex firmware 9.0 has fixed the issue of dprc_destroy_container i.e. the used portal is not return to the free pool. Which was resulting in error ethernet driver want to use this portal via either DPL or dynamically in Linux. Hard-coding of portal id is removed. Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun