u-boot.git/drivers/net/fsl-mc, branch v2020.01

common: Move command functions out of common.h

2019-12-02T23:25:02Z

Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move ARM cache operations out of common.h

2019-12-02T23:24:58Z

These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Tom Rini

drivers/fsl-mc: Create Kconfig file to manage driver specific configs better

2019-09-04T16:37:19Z

Create drivers/net/fsl-mc/Kconfig and move fsl-mc specific configs from arch/arm/cpu/armv8/fsl-layerscape/Kconfig to this new Kconfig Signed-off-by: Florinel Iordache Acked-by: Joe Hershberger

drivers: net: mc: Report extra memory to Linux

2019-08-22T03:37:35Z

MC firmware need to be aligned to 512M, so minimum 512MB DDR is reserved. But MC support to work with 128MB or 256MB DDR memory also, in this case, rest of the memory is not usable. So reporting this extra memory to Linux through dtb memory fixup. Signed-off-by: Meenakshi Aggarwal Reviewed-by: Prabhakar Kushwaha

env: Move env_get() to env.h

2019-08-11T20:43:41Z

Move env_get() over to the new header file. Acked-by: Joe Hershberger Signed-off-by: Simon Glass

mc : Reduce MC memory size to 128M

2019-03-15T06:22:00Z

ls2088, ls1088 : minimum MC Memory size is 128 MB lx2 : minimum MC memory size is 256 MB Signed-off-by: Meenakshi Aggarwal Acked-by: Joe Hershberger Reviewed-by: Prabhakar Kushwaha

driver: net: fsl-mc: Fix DPC MAC address fixup

2019-03-15T06:22:00Z

If node /board_info/ports does not exist in the DPC file, function mc_fixup_dpc() will skip not only MAC address fixup, but also the cache flush at the end. This may cause the other fixup changes (e.g. ICID related ones) to be ignored by MC. Fixes: 1161dbcc0a36 ("drivers: net: fsl-mc: Include MAC addr fixup to DPL") Signed-off-by: Ioana Radulescu Acked-by: Joe Hershberger Reviewed-by: Prabhakar Kushwaha

fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefi

2019-01-17T21:16:49Z

fsl-mc lazyapply command applies dpl from efi_exit_boot_services(). Status of fsl-mc node in working fdt is updated at this stage. However, an efi application like grub may already have copied the fdt. So the updates to fdt done at efi_exit_boot_services() may not be visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply command is used. Fixes: b7b8410a8f (ls2080: Exit dpaa only right before exiting U-Boot) Signed-off-by: Mian Yousaf Kaukab Reviewed-by: York Sun

driver: net: fsl-mc: initialize dpmac irrespective of phy

2018-10-10T17:45:23Z

The dpmac initalization should not depend on phy. As the phy is not necessary to be present for dpmac to function. Therefore, remove dpmac initialization dependency from phy. Signed-off-by: Pankaj Bansal Acked-by: Joe Hershberger

driver: net: fsl-mc: Memset MC reserve ram memory before usage

2018-09-27T15:55:21Z

Memory reserved for Management Complex needs to be cleaned before any usage. Signed-off-by: Prabhakar Kushwaha [York S: revised commit message] Reviewed-by: York Sun