u-boot.git/drivers/net/ldpaa_eth, branch v2016.03

driver: net: ldpaa: Add debug info of printing DPMAC stats

2016-01-27T16:13:11+00:00

Add debug information prints to provide DPMAC statistics
 - Number of bytes received
 - Number of received and discard frames
 - Number of bytes transferred
 - Number of frames transferred
 etc.

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

driver: net: ldpaa: Increase num of buffers for a pool

2016-01-27T16:13:11+00:00

Management Complex FW 9.0 set the hardware depletion to be 20
buffers in order to support multiple pools in DPNI. This requires
driver to fill the pool with at least 21 to be able to receive
frames. So, Increase number of buffers for a pool.

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

driver: net: ldpaa: Report back only error frames for tx

2016-01-27T16:13:11+00:00

Management Complex FW 9.0 puts a new requirement to provide Tx
confirmation and error queue configuration by calling
dpni_set_tx_conf API.

Configure report of only error frames for a tx frame.

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

driver: net: fsl-mc: flib changes for MC FW 9.0.0

2016-01-27T16:13:10+00:00

MC firmware version 9.0.0 contains
 - Support of new APIs
 - Update in existing APIs
 - Change in Major and minor version of DPAA2 objects

This patch contains modifications in FLIB files to support new
MC firmware version.

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

driver: net: fsl-mc: Add version check for MC objects

2016-01-27T16:13:10+00:00

Check and compare version of management  complex's object with
the version supported by Freescale ldpaa2 ethernet driver.

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

Fix GCC format-security errors and convert sprintfs.

2016-01-15T03:11:34+00:00

With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten 
Acked-by: Wolfgang Denk 
Reviewed-by: Tom Rini

armv8: ls2085a: Add support of LS2085A SoC

2015-11-30T17:10:47+00:00

Freescale's LS2085A is a another personality of LS2080A SoC with
support of AIOP and DP-DDR.
This Patch adds support of LS2085A Personality.

Signed-off-by: Pratiyush Mohan Srivastava 
Signed-off-by: Prabhakar Kushwaha 
[York Sun: Updated MAINTAINERS files
           Dropped #ifdef in cpu.h
           Add CONFIG_SYS_NS16550=y in defconfig]
Reviewed-by: York Sun

armv8: LS2080A: Rename LS2085A to reflect LS2080A

2015-11-30T16:53:04+00:00

LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)

Signed-off-by: Pratiyush Mohan Srivastava 
Signed-off-by: Prabhakar Kushwaha 
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: York Sun

driver: net: ldpaa: Fix Rx buffer alignment

2015-11-30T16:53:03+00:00

MC 0.7.1.2 enforces limitation i.e.: "Packets may be corrupted
in several combinations of buffer size and frame offsets.
Workaround: Use buffers that are of size that is a multiple of 256, and
frame offset that is a multiple of 256"

Updating the DPNI Eth driver to comply with the restriction.

Signed-off-by: Bogdan Hamciuc 
Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

driver: net: ldpaa: Add debug information

2015-11-30T16:53:03+00:00

Add following debug information in the driver
 - Get various DPNI counter values
 - Get link status of DPNI objects
 - Get information of both ends of connection (DPMAC - DPNI)

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun