u-boot.git/drivers/net/ldpaa_eth, branch v2018.09

fsl/mc: Limit the ethernet name to ETH_NAME_LEN

2018-08-08T15:23:49+00:00

The ethernet name should be within the ETH_NAME_LEN, as this
is the buffer space allocated to ethernet name.

Otherwise, this causes buffer overflow.

Reported-by: Ioana Ciornei 
Signed-off-by: Pankaj Bansal 
Reviewed-by: York Sun

driver: net: fsl-mc: updated copyright info

2018-05-09T14:17:51+00:00

Updated copyright info for the issues reported after running
check-legal test.

Signed-off-by: Yogesh Gaur 
Reviewed-by: York Sun

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

driver: net: fsl-mc: flib changes for MC 10.3.0

2017-12-06T22:55:17+00:00

Existing MC driver framework is based on MC-9.x.x flib. This patch
migrates MC obj (DPBP, DPNI, DPRC, DPMAC etc) to use latest MC flib
which is MC-10.3.0.

Changes introduced due to migration:
1. To get OBJ token, pair of create and open API replaces create APIs
2. Pair of close and destroy APIs replaces destroy APIs
3. For version read, get_version APIs replaces get_attributes APIs
4. dpni_get/reset_statistics APIs replaces dpni_get/set_counter APIs
5. Simplifies struct dpni_cfg and removes dpni_extended_cfg struct
6. Single API dpni_get_buffer_layout/set_buffer_layout replaces
   dpni_get_rx/set_rx, tx related, tx_conf_buffer_layout related APIs.
   New API takes a queue type as an argument.
7. Similarly dpni_get_queue/set_queue replaces
   dpni_get_rx_flow/set_rx_flow , tx_flow related, tx_conf related
   APIs

Signed-off-by: Yogesh Gaur 
Signed-off-by: Priyanka Jain 
Reviewed-by: York Sun

drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()

2017-11-14T16:33:20+00:00

The zero value returned from qbman_swp_acquire() is an error
condition meaning no free buffer for allocation.

Signed-off-by: Ashish Kumar 
Signed-off-by: Kushwaha Prabhakar 
[YS: revised commit message]
Reviewed-by: York Sun

armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID

2017-10-27T15:41:12+00:00

Since TX delay is now enabled only in PHY_INTERFACE_MODE_RGMII_ID
PHY_INTERFACE_MODE_RGMII_TXID.

These change where introduced in phy driver in commit 05b29aa0cb68
("net: phy: realtek: fix enabling of the TX-delay for RTL8211F").

Signed-off-by: Ashish Kumar 
Reviewed-by: York Sun

armv8: fsl-layerscape: Support to add RGMII for ls1088aqds

2017-09-11T15:01:05+00:00

This patch adds support for RGMII protocol

NXP's LDPAA2 support RGMII protocol. LS1088A is the
first Soc supporting both RGMII and SGMII.

Signed-off-by: Prabhakar Kushwaha 
Signed-off-by: Amrita Kumari 
Signed-off-by: Ashish Kumar 
Reviewed-by: York Sun

armv8: ls1088a: Add NXP LS1088A SoC support

2017-09-11T15:00:13+00:00

LS1088A is compliant with the Layerscape Chassis Generation 3 with
eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4
SDRAM memory controller with ECC, Data path acceleration architecture
2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs),
QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc.

Signed-off-by: Alison Wang 
Signed-off-by: Prabhakar Kushwaha 
Signed-off-by: Ashish Kumar 
Signed-off-by: Raghav Dogra 
Signed-off-by: Shaohui Xie 
[YS: Revised commit message]
Reviewed-by: York Sun

driver: net: ldpaa: Update priv->phydev after free()

2017-08-14T17:47:33+00:00

Even after memory free of phydev, priv is still pointing to the
obsolete address.
So update priv->phydev as NULL after memory free.

Signed-off-by: Prabhakar Kushwaha 
Signed-off-by: Ashish Kumar 
Acked-by: Joe Hershberger

armv8: ls2080a: Drop macro CONFIG_LS2080A

2017-04-17T16:03:30+00:00

Use CONFIG_ARCH_LS2080A instead.

Signed-off-by: York Sun