u-boot.git/drivers/net/ldpaa_eth, branch v2020.07

common: Drop linux/delay.h from common header

2020-05-19T01:19:23Z

Move this uncommon header out of the common header. Signed-off-by: Simon Glass

common: Drop linux/bug.h from common header

2020-05-19T01:19:23Z

Move this uncommon header out of the common header. Signed-off-by: Simon Glass

common: Drop log.h from common header

2020-05-19T01:19:18Z

Move this header out of the common header. Signed-off-by: Simon Glass

drivers: net: ldpaa: add DTS based probing support

2020-04-29T05:40:43Z

When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible. In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver and reuse the _open()/_tx()/_stop() functions already inplemented. For the moment, the ldpaa_eth driver will support both configurations: with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence now has a matching 'struct udevice' made mutually exclusive based on the state of CONFIG_DM_ETH. Signed-off-by: Florin Laurentiu Chiculita Signed-off-by: Ioana Ciornei Signed-off-by: Priyanka Jain

common: Move ARM cache operations out of common.h

2019-12-02T23:24:58Z

These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Tom Rini

common: Move mii_init() function out of common.h

2019-12-02T23:23:13Z

This function belongs in mii.h so move it over. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

drivers: net: ldpaa_eth: fix resource leak

2019-05-08T22:26:59Z

if an error occurs in ldpaa_eth_init, need to free all resources before returning the error. Threfore, free net_dev before returning from ldpaa_eth_init. Signed-off-by: Pankaj Bansal Acked-by: Joe Hershberger

drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset

2019-03-15T06:22:01Z

Fix EC1 and EC2 read from correct offset 26, instead of 25 Signed-off-by: Pramod Kumar Acked-by: Joe Hershberger Reviewed-by: Prabhakar Kushwaha

drivers: net: ldpaa_eth: check if the dpmac is enabled

2019-03-15T06:22:00Z

some dpmacs in armv8a based freescale layerscape SOCs can be configured via both serdes(sgmii, xfi, xlaui etc) bits and via EC*_PMUX(rgmii) bits in RCW. e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits Now if a dpmac is enabled by serdes bits then it takes precedence over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII, then the dpmac is SGMII and not RGMII. Therefore, in fsl_rgmii_init function of SOC, we will check if the dpmac is enabled or not? if it is (fsl_serdes_init has already enabled the dpmac), then don't enable it. Signed-off-by: Pankaj Bansal Acked-by: Joe Hershberger Reviewed-by: Prabhakar Kushwaha

armv8: lx2160a: Add LX2160A SoC Support

2018-12-06T22:37:19Z

LX2160A Soc is based on Layerscape Chassis Generation 3.2 architecture with features: 16 ARM v8 Cortex-A72 cores in 8 cluster, CCN508, SEC, 2 64-bit DDR4 memory controller, RGMII, 8 I2C controllers, 3 serdes modules, USB 3.0, SATA, 4 PL011 SBSA UARTs, 4 TZASC instances, etc. SoC personalites: LX2120A is SoC with Twelve 64-bit ARM v8 Cortex-A72 CPUs LX2080A is SoC with Eight 64-bit ARM v8 Cortex-A72 CPUs Signed-off-by: Bao Xiaowei Signed-off-by: Hou Zhiqiang Signed-off-by: Meenakshi Aggarwal Signed-off-by: Vabhav Sharma Signed-off-by: Sriram Dash Signed-off-by: Priyanka Jain Reviewed-by: York Sun