u-boot.git/drivers/net/macb.c, branch v2016.09

net: mii: Use spatch to update miiphy_register

2016-08-15T20:26:33+00:00

Run scripts/coccinelle/net/mdio_register.cocci on the U-Boot code base.

Signed-off-by: Joe Hershberger 
Reviewed-by: Bin Meng

net: macb: Fix build error for CONFIG_DM_ETH enabled

2016-08-15T18:34:44+00:00

Use the right phy_connect() prototype for CONFIGF_DM_ETH.
Support to get the phy interface from dt and set GMAC_UR.

Signed-off-by: Wenyou Yang 
Acked-by: Joe Hershberger

net: macb: Convert to driver model

2016-06-12T21:49:38+00:00

Add driver-model support to this driver. The old code remains for now so
that we can convert boards one at a time.

Signed-off-by: Simon Glass 
Reviewed-by: Heiko Schocher 
Tested-on: smartweb, corvus, taurus, axm
Tested-by: Heiko Schocher 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann

net: macb: Flush correct cache portion when sending

2016-06-12T21:49:38+00:00

The end address of the cache flush must be cache-line-aligned since
otherwise (at least on ARM926-EJS) the request is ignored. When the cache
is enabled this means that packets are not sent.

Signed-off-by: Simon Glass 
Reviewed-by: Heiko Schocher 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann

net: macb: Prepare for driver-model conversion

2016-06-12T21:49:38+00:00

Adjust this driver to avoid using struct netdev in functions that driver
model will call. Also refactor the receive function to be compatible with
driver model.

Signed-off-by: Simon Glass 
Reviewed-by: Heiko Schocher 
Tested-on: smartweb, corvus, taurus, axm
Tested-by: Heiko Schocher 
Reviewed-by: Joe Hershberger 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann

Fix various typos, scattered over the code.

2016-05-06T01:39:26+00:00

Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller

net: macb: Not all the GEM are gigabit capable

2016-01-27T12:58:58+00:00

During the initialization of PHY the gigabit bit capable is set if the
controller is a GEM. However, for sama5d2 and sama5d4, the GEM is
configured to support only 10/100.

Improperly setting the GBE capability leads to an unresponsive MAC
controller. This patch fixes this behavior allowing using the gmac with
these SoCs.

Suggested-by: Nicolas Ferre 
Signed-off-by: Gregory CLEMENT 
Acked-by: Nicolas Ferre 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann 
[fixed minor checkpatch warning]
Signed-off-by: Andreas Bießmann

net: macb: add gmac multi-queue support

2015-08-11T18:27:15+00:00

This patch refer to linux kernel commit: d8b763e1e79f
  net/macb: add TX multiqueue support for gem
  by: Cyrille Pitchen

1. macb driver will check the register to find how many queues support for
this chip.

2. Then as we only use queue0 for tx, so we will set up all other queues
use a dummy descriptor, which USED bit is set. So those queues are not used.

Signed-off-by: Josh Wu 
Acked-by: Joe Hershberger

net: Update hardware MAC address if it changes in env

2015-05-19T18:33:21+00:00

When the ethaddr changes in the env, the hardware should also be updated
so that MAC filtering will work properly without resetting U-Boot.

Also remove the manual calls to set the hwaddr that was included in a
few drivers as a result of the framework not doing it.

Reported-by: Michal Simek 
Signed-off-by: Joe Hershberger 
Tested-by: Michal Simek

net: cosmetic: Fix var naming net <-> eth drivers

2015-04-18T17:11:33+00:00

Update the naming convention used in the network stack functions and
variables that Ethernet drivers use to interact with it.

This cleans up the temporary hacks that were added to this interface
along with the DM support.

This patch has a few remaining checkpatch.pl failures that would be out
of the scope of this patch to fix (drivers that are in gross violation
of checkpatch.pl).

Signed-off-by: Joe Hershberger 
Acked-by: Simon Glass