u-boot.git/drivers/net/macb.c, branch v2016.11

net, macb: fix misaligned cache operation warning

2016-10-02T00:05:14+00:00

when using tftp on the smartweb board, it prints a lot of

CACHE: Misaligned operation at range [23b2e000, 23b2e100]

warnings ... fixed them.

Signed-off-by: Heiko Schocher

treewide: replace #include with

2016-09-24T02:25:27+00:00

Now, include/linux/errno.h is a wrapper of .
Replace all include directives for  with
.

 is supposed to be included from  when
arch-headers fall back into generic implementation. Generally, they
should not be directly included from .c files.

Signed-off-by: Masahiro Yamada 
[trini: Add drivers/usb/host/xhci-rockchip.c]
Signed-off-by: Tom Rini

net: mii: Use spatch to update miiphy_register

2016-08-15T20:26:33+00:00

Run scripts/coccinelle/net/mdio_register.cocci on the U-Boot code base.

Signed-off-by: Joe Hershberger 
Reviewed-by: Bin Meng

net: macb: Fix build error for CONFIG_DM_ETH enabled

2016-08-15T18:34:44+00:00

Use the right phy_connect() prototype for CONFIGF_DM_ETH.
Support to get the phy interface from dt and set GMAC_UR.

Signed-off-by: Wenyou Yang 
Acked-by: Joe Hershberger

net: macb: Convert to driver model

2016-06-12T21:49:38+00:00

Add driver-model support to this driver. The old code remains for now so
that we can convert boards one at a time.

Signed-off-by: Simon Glass 
Reviewed-by: Heiko Schocher 
Tested-on: smartweb, corvus, taurus, axm
Tested-by: Heiko Schocher 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann

net: macb: Flush correct cache portion when sending

2016-06-12T21:49:38+00:00

The end address of the cache flush must be cache-line-aligned since
otherwise (at least on ARM926-EJS) the request is ignored. When the cache
is enabled this means that packets are not sent.

Signed-off-by: Simon Glass 
Reviewed-by: Heiko Schocher 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann

net: macb: Prepare for driver-model conversion

2016-06-12T21:49:38+00:00

Adjust this driver to avoid using struct netdev in functions that driver
model will call. Also refactor the receive function to be compatible with
driver model.

Signed-off-by: Simon Glass 
Reviewed-by: Heiko Schocher 
Tested-on: smartweb, corvus, taurus, axm
Tested-by: Heiko Schocher 
Reviewed-by: Joe Hershberger 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann

Fix various typos, scattered over the code.

2016-05-06T01:39:26+00:00

Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller

net: macb: Not all the GEM are gigabit capable

2016-01-27T12:58:58+00:00

During the initialization of PHY the gigabit bit capable is set if the
controller is a GEM. However, for sama5d2 and sama5d4, the GEM is
configured to support only 10/100.

Improperly setting the GBE capability leads to an unresponsive MAC
controller. This patch fixes this behavior allowing using the gmac with
these SoCs.

Suggested-by: Nicolas Ferre 
Signed-off-by: Gregory CLEMENT 
Acked-by: Nicolas Ferre 
Acked-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann 
[fixed minor checkpatch warning]
Signed-off-by: Andreas Bießmann

net: macb: add gmac multi-queue support

2015-08-11T18:27:15+00:00

This patch refer to linux kernel commit: d8b763e1e79f
  net/macb: add TX multiqueue support for gem
  by: Cyrille Pitchen

1. macb driver will check the register to find how many queues support for
this chip.

2. Then as we only use queue0 for tx, so we will set up all other queues
use a dummy descriptor, which USED bit is set. So those queues are not used.

Signed-off-by: Josh Wu 
Acked-by: Joe Hershberger