u-boot.git/drivers/net/mscc_eswitch, branch v2020.01Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/net/mscc_eswitch?h=v2020.012019-07-15T18:32:25Znet: mscc: refactor mscc_miim2019-07-15T18:32:25ZHoratiu Vulturhoratiu.vultur@microchip.com2019-06-09T13:27:29Zurn:sha1:61243678c2ffe39b23ac73adb9b42c3d317817ce
Because all MSCC SoC use the same MDIO bus, put the implementation in
one common file(mscc_miim) and make all the other MSCC network drivers to
use these functions.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net: mscc: serval: Remove delay when serdes is configured2019-07-15T18:32:25ZHoratiu Vulturhoratiu.vultur@microchip.com2019-05-23T19:45:33Zurn:sha1:149468699e8f631f69d55b5c86b430824fc32d69
When serdes configuration was written in hardware there was a delay
of 100ms to be sure that configuration was written. But the delay is not
needed because already the function serdes_write it is checking that the
operation finished.
Therefore remove the mdelay. This improves the speed of configuring the
network driver.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net: mscc: luton: Update network driver for pcb902019-05-03T14:46:36ZHoratiu Vulturhoratiu.vultur@microchip.com2019-05-01T11:16:58Zurn:sha1:7e323f17829d3cb336d8fa1a07e521f82d45e9f1
Update Luton network driver to have support also for pcb90. The pcb90
has 24 ports from which 12 ports are connected to SerDes6G.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
net: mscc: ocelot: Update network driver for pcb1202019-05-03T14:42:23ZHoratiu Vulturhoratiu.vultur@microchip.com2019-04-24T09:27:57Zurn:sha1:6390da4a5770e59ac220c1b0412a66d2c861a547
Update Ocelot network driver to have support also for pcb120.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
net: Add MSCC Serval network driver.2019-05-03T14:42:23ZHoratiu Vulturhoratiu.vultur@microchip.com2019-04-11T12:11:32Zurn:sha1:8cf9473288dc4f35858d8267b7b4ed0702c89209
Add network driver for Microsemi Ethernet switch.
It is present on Serval SoCs.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
net: Add MSCC ServalT network driver.2019-04-12T15:32:52ZHoratiu Vulturhoratiu.vultur@microchip.com2019-04-08T08:31:36Zurn:sha1:746f2d3e8bf4961b9f5558c21bc67a61b2b89eee
Add network driver for Microsemi Ethernet switch.
It is present on ServalT SoCs.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
net: Add MSCC Jaguar2 network driver.2019-04-12T15:32:51ZHoratiu Vulturhoratiu.vultur@microchip.com2019-04-03T17:54:45Zurn:sha1:5e1d417bec92ac1045b31e7144f35d66b420dc0a
Add network driver for Microsemi Ethernet switch.
It is present on Jaguar2 SoCs.
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
net: mscc: ocelot: Fix reset of the phys2019-04-12T15:32:50ZHoratiu Vulturhoratiu.vultur@microchip.com2019-03-27T09:16:18Zurn:sha1:cd424f35ee37c105c6d32fa3b06cd49178af0840
The function mscc_miim_reset resets all the phys, but it is called for
each phy separetely. One consequence of this is that the boot time
is increased by 2 seconds.
The fix consists for calling the mscc_miim_reset function only once for
all phys.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
net: Add MSCC Luton networkd driver.2019-02-01T13:13:36ZHoratiu Vulturhoratiu.vultur@microchip.com2019-01-31T14:30:39Zurn:sha1:c5620aeea44d9e3bb64a35cb5b7207772bf74997
Add network driver for Microsemi Ethernet switch, it is
present on Luton SoCs.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
net: mscc: Remove unused variables2019-02-01T13:13:36ZHoratiu Vulturhoratiu.vultur@microchip.com2019-01-31T14:30:37Zurn:sha1:0b8f34dc8cd6a678b26d80152f7bb324bcc15920
Remove unused variables in the struct ocelot_private and make
miim variable static.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>