u-boot.git/drivers/net/phy/Kconfig, branch v2022.04

net: phy: add TI DP83869HM ethernet driver

2022-01-15T16:50:16Z

This driver is based on an older downstream TI kernel, with changes and cleanups to work with mainline device-tree bindings. Signed-off-by: Dominic Rath Signed-off-by: Christian Gmeiner Reviewed-by: Ramon Fried

net: phy: realtek: Add tx/rx delay config for 8211e

2021-11-23T07:57:56Z

Some boards need to change the tx/rx delay config in order for gigabit Ethernet to work. In Linux commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), Realtek documented the bits for overriding the delays from the hardware straps. Copy the logic from linux, so the delay config is set from the PHY's interface type (the phy-mode property in the device tree). This removes the need for a one-off workaround for the Pine A64+ board. Signed-off-by: Samuel Holland Reviewed-by: Ramon Fried

Kconfig: Remove all default n/no options

2021-08-31T21:47:49Z

default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini

configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to Kconfig

2021-08-18T10:25:15Z

Use moveconfig.py script to convert below defines to Kconfig and move these entries to defconfigs. CONFIG_CORTINA_FW_ADDR CONFIG_CORTINA_FW_LENGTH Signed-off-by: Kuldeep Singh Reviewed-by: Priyanka Jain

phy: add nxp tja1103 phy driver

2021-07-06T02:22:41Z

Add nxp tja1103 phy driver. Signed-off-by: Radu Pirea (NXP OSS) Reviewed-by: Ramon Fried

net: phy: xilinx: Drop #ifdef CONFIG_DM_ETH around phy_connect_gmii2rgmii()

2021-04-15T08:52:17Z

At present phy_connect_gmii2rgmii() is implemented using a DM API dev_of_offset() hence it cannot support a non-DM configuration. Remove the non-DM version prototype of phy_connect_gmii2rgmii() and make the driver depend on CONFIG_DM_ETH. Signed-off-by: Bin Meng Acked-by: Michal Simek Reviewed-by: Ramon Fried Reviewed-by: Vladimir Oltean Reviewed-by: Priyanka Jain

net: phy: ca_phy: Add driver for CAxxxx SoCs

2021-01-27T15:47:47Z

Add phy driver support for MACs embedded inside Cortina Access SoCs Signed-off-by: Abbie Chang Signed-off-by: Alex Nemirovsky CC: Joe Hershberger CC: Tom Rini CC: Aaron Tseng Moved out PHY specific code out of Cortina NI Ethernet driver and into a Cortina Access PHY interface driver

drivers/net/phy: Add CORTINA_NO_FW_UPLOAD to Kconfig

2020-12-10T08:26:39Z

Move CORTINA_NO_FW_UPLOAD to Kconfig file so that it can be controlled via defconfig files. Signed-off-by: Meenakshi Aggarwal Reviewed-by: Priyanka Jain

net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust rx/tx timings

2020-07-07T20:09:22Z

RTL8201F PHY module found on Actions Semi Cubieboard7 seems to have specific Rx/Tx interface timings requirement for proper PHY operations. These timing values are not documented anywhere and picked from vendor code. This commits lets proper packets to be transmitted over the network. Signed-off-by: Amit Singh Tomar

net: phy: Add DP8382x phy registration to TI PHY init

2020-06-12T17:17:23Z

Add the DP8382X generic PHY registration to the TI PHY init file. Acked-by: Michal Simek Signed-off-by: Dan Murphy