u-boot.git/drivers/net/phy/Makefile, branch v2025.01

net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy

2023-07-12T05:21:40Z

Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have verified the driver on StarFive VisionFive2 board. Signed-off-by: Yanhong Wang Reviewed-by: Ramon Fried

net: phy: marvell10g: Adapt Marvell 10G PHY driver from Linux

2023-04-07T12:21:37Z

Pull Marvell 10G PHY driver from Linux 6.1.y as of commit d6d29292640d3 ("net: phy: marvell10g: select host interface configuration") and heavily adapt to match U-Boot PHY framework. Support for hwmon is removed as is much other functionality which could not be tested, this results in much simpler driver which can only bring the PHY up and set MAC type. Signed-off-by: Marek Vasut Reviewed-by: Ramon Fried

net: phy: ti: Convert to U_BOOT_PHY_DRIVER()

2023-04-07T12:18:50Z

Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" This particular PHY driver is slightly more spread out across additional source files. Since the phy_register() calls are no longer necessary, all the registration calls across those source files is dropped. Furthermore, the Makefile can now be updated to only compile generic TI PHY support if matching Kconfig symbol is enabled and the ifdeffery in the generic TI PHY driver can be dropped. Signed-off-by: Marek Vasut Acked-by: Michal Simek Tested-by: Michal Simek #microblaze (MANUAL_RELOC)

phy: add driver for Intel XWAY PHY

2022-11-28T18:06:40Z

Add a driver for the Intel XWAY GbE PHY: - configure RGMII using dt phy-mode and standard delay properties - use genphy_config Signed-off-by: Tim Harvey

Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net

2022-04-15T12:10:32Z

- DM9000 DM support - tftp server bug fix - mdio ofnode support functions - Various phy fixes and improvements. [trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c drivers/net/phy/phy.c include/phy.h]

net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver

2022-04-12T17:10:44Z

Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special BroadRReach 100BaseT1 PHYs used in automotive. Signed-off-by: Michael Trimarchi Signed-off-by: Ariel D'Alessandro Reviewed-by: Ramon Fried

phy: adin: add driver for Analog Devices ADIN1300 PHY

2022-04-10T05:44:13Z

The current implementation configures RGMII using device tree phy-mode property and then calls genphy_config adin_config_rgmii_mode is derived from: https://github.com/varigit/linux-imx/blob/lf-5.10.y_var04/drivers/net/phy/adin.c#L218-L262 Signed-off-by: Nate Drude Reviewed-by: Ramon Fried

net: phy: Add support for ethernet-phy-id with gpio reset

2022-03-09T11:43:16Z

Ethernet phy like dp83867 is using strapping resistors to setup PHY address. On Xilinx boards strapping is setup on wires which are connected to SOC where internal pull ups/downs influnce phy address. That's why there is a need to setup pins properly (via pinctrl driver for example) and then perform phy reset. I can be workarounded by reset gpio done for mdio bus but this is not working properly when multiply phys sitting on the same bus. That's why it needs to be done via ethernet-phy-id driver where dt binding has gpio reset per phy. DT binding is available here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-phy.yaml The driver is are reading the vendor and device id from valid phy node using ofnode_read_eth_phy_id() and creating a phy device. Kconfig PHY_ETHERNET_ID symbol is used because not every platform has gpio support. Signed-off-by: Michal Simek Signed-off-by: T Karthik Reddy Link: https://lore.kernel.org/r/70ab7d71c812b2c972d48c129e416c921af0d7f5.1645627539.git.michal.simek@xilinx.com

net: phy: add TI DP83869HM ethernet driver

2022-01-15T16:50:16Z

This driver is based on an older downstream TI kernel, with changes and cleanups to work with mainline device-tree bindings. Signed-off-by: Dominic Rath Signed-off-by: Christian Gmeiner Reviewed-by: Ramon Fried

phy: add nxp tja1103 phy driver

2021-07-06T02:22:41Z

Add nxp tja1103 phy driver. Signed-off-by: Radu Pirea (NXP OSS) Reviewed-by: Ramon Fried