u-boot.git/drivers/net/phy/phy.c, branch v2015.01 Unnamed repository; edit this file 'description' to name the repository. net/phy: Add support for CS4315/CS4340 PHY 2014-12-05T16:06:11+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2014-11-10T10:32:29+00:00 9b18e5199ec42f9dc62c0da7f4fe7554e199980d Add support for Cortina CS4315/CS4340 10G PHY. - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device to initialize Cortina PHY. - Cortina PHY has non-standard offset of PHY ID registers, thus we define own get_phy_id() to override default get_phy_id(). - To define macro CONFIG_PHY_CORTINA will enable this driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
Add support for Cortina CS4315/CS4340 10G PHY.
- This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
  to initialize Cortina PHY.
- Cortina PHY has non-standard offset of PHY ID registers, thus
  we define own get_phy_id() to override default get_phy_id().
- To define macro CONFIG_PHY_CORTINA will enable this driver.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Merge branch 'master' of git://git.denx.de/u-boot-ti 2014-10-27T13:05:43+00:00 Tom Rini trini@ti.com 2014-10-27T13:05:43+00:00 5aa7bece1045c28806ce919099616ebe8fa63325 






net: phy: fix warnings with W=1
2014-10-25T11:01:59+00:00

Jeroen Hofstee
jeroen@myspectrum.nl

2014-10-08T20:57:26+00:00

3c6928fd7b0f849cd1ed882f41a769286e3e35d1

get_phy_id is marked weak but has no protype nor a
strong version, just make it static. Use __weak for
board_phy_config.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>





get_phy_id is marked weak but has no protype nor a
strong version, just make it static. Use __weak for
board_phy_config.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>







net: phy: print a number of phy that is not found
2014-10-23T15:27:28+00:00

Khoronzhuk, Ivan
ivan.khoronzhuk@ti.com

2014-10-17T17:44:32+00:00

adc9a79f3f7c6d79f32048598f4d18cf0f48180f

In case when several Ethernet ports are supported it's
convenient to see the number of phy that is not found.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>





In case when several Ethernet ports are supported it's
convenient to see the number of phy that is not found.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>







drivers: net: remove dead drivers
2014-08-21T16:01:11+00:00

Masahiro Yamada
yamada.m@jp.panasonic.com

2014-08-03T23:11:37+00:00

368b4d2b49bbbf379d9334747fbbd2aaaafe4356

The following configs are not defined at all:

 - CONFIG_INCA_IP_SWITCH
 - CONFIG_PBL2800_ETHER
 - CONFIG_PHY_ICPLUS

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>





The following configs are not defined at all:

 - CONFIG_INCA_IP_SWITCH
 - CONFIG_PBL2800_ETHER
 - CONFIG_PHY_ICPLUS

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>







phy: fix create_phy_by_mask for when its given an actual search mask
2014-06-05T18:44:56+00:00

Cormier, Jonathan
jcormier@criticallink.com

2014-05-21T17:08:52+00:00

08be2836df0b07aac65fea583b762335569fd47a

get_phy_id returns -EIO when it can't read from a phy at a given addr.  This would cause
create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask.

Example usage:
Replace
    phydev = phy_connect(bus, phy_addr, dev, phy_if)
with
    phydev = phy_find_by_mask(bus, phy_mask, phy_if)
    if (phydev)
	phy_connect_dev(phydev, dev);

Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>





get_phy_id returns -EIO when it can't read from a phy at a given addr.  This would cause
create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask.

Example usage:
Replace
    phydev = phy_connect(bus, phy_addr, dev, phy_if)
with
    phydev = phy_find_by_mask(bus, phy_mask, phy_if)
    if (phydev)
	phy_connect_dev(phydev, dev);

Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>







net/phy: enable get_phy_id redefinable
2014-05-12T19:19:45+00:00

Shengzhou Liu
Shengzhou.Liu@freescale.com

2014-04-11T08:14:17+00:00

597fe041a85fe3b1bf6044adf5e132f7a5457000

As some PHYs have non-standard PHY ID registers, PHY Id can't
be read correctly by current get_phy_id function, so we enable
get_phy_id redefinable to permit specific PHY driver having own
specific get_phy_id function.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>





As some PHYs have non-standard PHY ID registers, PHY Id can't
be read correctly by current get_phy_id function, so we enable
get_phy_id redefinable to permit specific PHY driver having own
specific get_phy_id function.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>







phy: Use supported field during autonegotiation
2013-11-22T23:03:20+00:00

David Dueck
davidcdueck@googlemail.com

2013-11-05T16:23:02+00:00

3a530d1b3e947c09e882dda8883aa608458a598c

The current code incorrectly detects gigabit capabilities for some
100Mbit/s phys. (lan8720a)

Signed-off-by: David Dueck <davidcdueck@googlemail.com>





The current code incorrectly detects gigabit capabilities for some
100Mbit/s phys. (lan8720a)

Signed-off-by: David Dueck <davidcdueck@googlemail.com>







net, phy, cpsw: fix gigabit register access
2013-07-30T13:21:42+00:00

Heiko Schocher
hs@denx.de

2013-07-23T13:32:36+00:00

f6d1f6e4a58edae4776937647381a43fea5e83a5

accessing a lan9303 switch with the cpsw driver results in wrong
speed detection, as the switch sets the BMSR_ERCAP in BMSR
register, and follow read of the MII_STAT1000 register fails, as
the switch does not support it. Current code did not check,
if a phy_read() fails ... fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>





accessing a lan9303 switch with the cpsw driver results in wrong
speed detection, as the switch sets the BMSR_ERCAP in BMSR
register, and follow read of the MII_STAT1000 register fails, as
the switch does not support it. Current code did not check,
if a phy_read() fails ... fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>







Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24T13:44:38+00:00

Wolfgang Denk
wd@denx.de

2013-07-08T07:37:19+00:00

1a4596601fd395f3afb8f82f3f840c5e00bdd57a

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>





Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>