u-boot.git/drivers/net/phy/phy.c, branch v2015.07 Unnamed repository; edit this file 'description' to name the repository. net: phy: Add support for all targets which requires MANUAL_RELOC 2015-05-19T18:33:21+00:00 Michal Simek michal.simek@xilinx.com 2015-05-13T11:40:40+00:00 abbfcbe58eefc1accda5dd120fcfe58d244b63dd Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA relocation (mostly only GOT) where functions aray are not updated. This patch is fixing function pointers passed to phy_register function. This patch was tested on Microblaze architecture. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA
relocation (mostly only GOT) where functions aray are not
updated. This patch is fixing function pointers passed to phy_register
function.
This patch was tested on Microblaze architecture.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net/phy: fixup for get_phy_id 2015-04-20T22:57:13+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2015-04-07T10:46:32+00:00 5707d5ffd42a45088f433a2514d1320a6491697b commit 3c6928fd7b0f84 "net: phy: fix warnings with W=1" caused some PHYs(e.g. CS4315/CS4340) not working. This patch fixes the warning and make those special PHYs working as well. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> 
commit 3c6928fd7b0f84 "net: phy: fix warnings with W=1" caused
some PHYs(e.g. CS4315/CS4340) not working. This patch fixes the
warning and make those special PHYs working as well.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
dm: net: Adjust PHY interface to work with CONFIG_DM_ETH 2015-04-18T17:11:36+00:00 Simon Glass sjg@chromium.org 2015-04-05T22:07:39+00:00 c74c8e6651e760c6b0a25aa229b9adde706a547b When driver model is used for Ethernet a few functions are passed a udevice instead of an eth_device. Also add a function to find a PHY type given its name. This will be used to decode the device tree node. Finally, put a phy_interface field in struct eth_pdata since this is an important part of the platform data for Ethernet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
When driver model is used for Ethernet a few functions are passed a udevice
instead of an eth_device. Also add a function to find a PHY type given its
name. This will be used to decode the device tree node.

Finally, put a phy_interface field in struct eth_pdata since this is an
important part of the platform data for Ethernet.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
phylib: add support for aquantia PHYs 2015-01-16T17:32:11+00:00 Shaohui Xie Shaohui.Xie@freescale.com 2014-12-30T10:32:04+00:00 f7c38cf827a0cf9d5ab4ca60131dffa10a2e4309 This patch supports AQ1202, AQ2104, AQR105 PHY. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com> 
This patch supports AQ1202, AQ2104, AQR105 PHY.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net/phy: Add support for CS4315/CS4340 PHY 2014-12-05T16:06:11+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2014-11-10T10:32:29+00:00 9b18e5199ec42f9dc62c0da7f4fe7554e199980d Add support for Cortina CS4315/CS4340 10G PHY. - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device to initialize Cortina PHY. - Cortina PHY has non-standard offset of PHY ID registers, thus we define own get_phy_id() to override default get_phy_id(). - To define macro CONFIG_PHY_CORTINA will enable this driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
Add support for Cortina CS4315/CS4340 10G PHY.
- This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
  to initialize Cortina PHY.
- Cortina PHY has non-standard offset of PHY ID registers, thus
  we define own get_phy_id() to override default get_phy_id().
- To define macro CONFIG_PHY_CORTINA will enable this driver.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Merge branch 'master' of git://git.denx.de/u-boot-ti 2014-10-27T13:05:43+00:00 Tom Rini trini@ti.com 2014-10-27T13:05:43+00:00 5aa7bece1045c28806ce919099616ebe8fa63325 






net: phy: fix warnings with W=1
2014-10-25T11:01:59+00:00

Jeroen Hofstee
jeroen@myspectrum.nl

2014-10-08T20:57:26+00:00

3c6928fd7b0f849cd1ed882f41a769286e3e35d1

get_phy_id is marked weak but has no protype nor a
strong version, just make it static. Use __weak for
board_phy_config.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>





get_phy_id is marked weak but has no protype nor a
strong version, just make it static. Use __weak for
board_phy_config.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>







net: phy: print a number of phy that is not found
2014-10-23T15:27:28+00:00

Khoronzhuk, Ivan
ivan.khoronzhuk@ti.com

2014-10-17T17:44:32+00:00

adc9a79f3f7c6d79f32048598f4d18cf0f48180f

In case when several Ethernet ports are supported it's
convenient to see the number of phy that is not found.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>





In case when several Ethernet ports are supported it's
convenient to see the number of phy that is not found.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>







drivers: net: remove dead drivers
2014-08-21T16:01:11+00:00

Masahiro Yamada
yamada.m@jp.panasonic.com

2014-08-03T23:11:37+00:00

368b4d2b49bbbf379d9334747fbbd2aaaafe4356

The following configs are not defined at all:

 - CONFIG_INCA_IP_SWITCH
 - CONFIG_PBL2800_ETHER
 - CONFIG_PHY_ICPLUS

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>





The following configs are not defined at all:

 - CONFIG_INCA_IP_SWITCH
 - CONFIG_PBL2800_ETHER
 - CONFIG_PHY_ICPLUS

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>







phy: fix create_phy_by_mask for when its given an actual search mask
2014-06-05T18:44:56+00:00

Cormier, Jonathan
jcormier@criticallink.com

2014-05-21T17:08:52+00:00

08be2836df0b07aac65fea583b762335569fd47a

get_phy_id returns -EIO when it can't read from a phy at a given addr.  This would cause
create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask.

Example usage:
Replace
    phydev = phy_connect(bus, phy_addr, dev, phy_if)
with
    phydev = phy_find_by_mask(bus, phy_mask, phy_if)
    if (phydev)
	phy_connect_dev(phydev, dev);

Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>





get_phy_id returns -EIO when it can't read from a phy at a given addr.  This would cause
create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask.

Example usage:
Replace
    phydev = phy_connect(bus, phy_addr, dev, phy_if)
with
    phydev = phy_find_by_mask(bus, phy_mask, phy_if)
    if (phydev)
	phy_connect_dev(phydev, dev);

Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>